New compact bandpass filter using microstrip /spl lambda//4 resonators with open stub inverter
โ Scribed by Jae-Ryong Lee; Jeong-Hoon Cho; Sang-Won Yun
- Book ID
- 114561958
- Publisher
- IEEE
- Year
- 2000
- Tongue
- English
- Weight
- 44 KB
- Volume
- 10
- Category
- Article
- ISSN
- 1051-8207
No coin nor oath required. For personal study only.
๐ SIMILAR VOLUMES
## Abstract In this article, a compact dualโmode ฮป~g~/2 bandpass filter with the characteristic of harmonic rejection is designed and implemented.The second and third harmonics of the suggested bandpass filter are rejected by using the additional open stubs of the __T__โtype equivalent circuit for
GHz. For this reason, the spacing t was selected to be 1.0 mm for the prototype constructed here. The radiation characteristics of the constructed prototype were also studied. Figures 7 and8 plot the measured radiation patterns at the center frequencies (2442 and 5500 MHz) for the 2.4-GHz and 5.2/5
## Abstract A new miniature microstrip fourโpole bandpass filter using a twoโlayer structure with quarterโwavelength resonators and open stub inverters is proposed. The coupling between the resonators in the two layers is achieved via a slot etched on a common ground plane located between the layer
## Abstract In this paper, a bandpass filter using a microstrip slowโwave openโloop resonator with high impedance lines is presented. This resonator has the high impedance of a loaded microstrip line, which significantly increases not only the slowโwave effect but also the dispersion effect. These