Neutron Stress Measurement of W-Fiber Reinforced Cu Composite

✍ Scribed by M. Nishida; T. Hanabusa; Y. Ikeuchi; N. Minakawa

• Publisher: John Wiley and Sons
• Year: 2003
• Tongue: English
• Weight: 492 KB
• Volume: 34
• Category: Article
• ISSN: 0933-5137
• DOI: 10.1002/mawe.200390015

✦ Synopsis

Abstract

Stress measurement methods using neutron and X‐ray diffraction were examined by comparing the surface stresses with internal stresses in the continuous tungsten‐fiber reinforced copper‐matrix composite. Surface stresses were measured by X‐ray stress measurement with the sin^2^ψ method. Furthermore, the sin^2^ψ method and the most common triaxal measurement method using Hooke's equation were employed for internal stress measurement by neutron diffraction. On the other hand, microstress distributions developed by the difference in the thermal expansion coefficients between these two phases were calculated by FEM. The weighted average strains and stresses were compared with the experimental results. The FEM results agreed with the experimental results qualitatively and confirmed the importance of the triaxial stress analysis in the neutron stress measurement.