## Abstract In this paper, the radiation field of a rectangular microstrip antenna is calculated considering four edges of the antenna. The present method is based on expressing the radiated field, the radiation power, and the power losses in terms of the feeding voltage, and then developing an exp
Near-field radiation from microstrip lines
โ Scribed by Leung Tsang
- Publisher
- John Wiley and Sons
- Year
- 1998
- Tongue
- English
- Weight
- 214 KB
- Volume
- 19
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
โฆ Synopsis
Figure 8 Radiation pattern of the PWIFA antenna at 6.0 GHz, s 90ะ
surements. One main conclusion from the results presented here is that the influence of the connector cannot be neglected since, for some antenna types, its influence on bandwidth and resonance frequency can be quite severe when the connector dimensions approach those of the antenna.
๐ SIMILAR VOLUMES
The sound radiation efficiency of a harmonically point-forced and simply supported rectangular plate is obtained numerically and is compared with that of a circular plate. The effect of aspect ratio and thickness on sound radiation efficiency is also studied. Since the radiation of sound from the pl
An efficient method for frequency-domain and transient analysis of the nonuniform lossless coupled microstrip transmission lines excited by external electromagnetic waves is presented. The nonuniform coupled microstrip transmission lines system is first decomposed into a large number of uniform sect
Recently it has become necessao' to determine far-field characteristics o[" marine vehicle noise from near-field measurements. It is possible to compute fitr-field characteristics from near-field measurements by using the Hehnholtz integral equation. But this method is not practical because a great
Microstrips are open structures, that tend to radiate as the frequency of the signal increases within the microwave range. Radiation becomes significant in the vicinity of discontinuities, particularly when parts of thestructure resonate. This situation is encountered in the design of filters, which