If the antenna factor is defined as the ratio of incident electric field strength to the output voltage with zero reflection at the load, relative measurement of the antenna factor can be carried out using a reference antenna with a known antenna factor. In this study, an antenna factor of a log dip
Near-field measurement method of a phased-array antenna—measurement of element amplitude and phase for array
✍ Scribed by Ken'ichi Haryu; Isamu Chiba; Seiji Mano; Takashi Katagi
- Publisher
- John Wiley and Sons
- Year
- 1996
- Tongue
- English
- Weight
- 649 KB
- Volume
- 79
- Category
- Article
- ISSN
- 8756-6621
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
In array antennas, sometimes the desired radiation pattern cannot be obtained due to coupling between element antennas, reflections from the surroundings, or amplitude and phase error of the power supply circuits or failures. In these cases, it is necessary to regenerate the desired radiation patter
A method of reducing the electromagnetic interference over a broad frequency range by controlling the excitation phase of the element antennas for beam shaping in a phase array used in such systems as wireless LAN is discussed. In this method, an optimum excitation phase of each element antenna is d
Both the optimization of B 1 field homogeneity in high-field MRI and the implementation of the exciting new theory of transmit SENSE can be accomplished by individual and independent control of the amplitude and phase of current on the elements or rungs of a radio frequency (RF) transmit coil array.
## Abstract This paper describes the design, fabrication, and measurement of a sequential‐rotation microstrip‐array antenna for the Electronic Toll Collection System (ETCS). The ETCS is made possible by using roadside equipment with a radiation pattern that can accurately pinpoint the designated co
## Abstract In this article, we present position indication functionality as obtained by using a retrodirective array, thereby allowing location information extraction of the position of the remote transmitter with which the retrodirective array is cooperating.This is carried out using straightforw