𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Nanocrystalline hydroxyapatite/titania coatings on titanium improves osteoblast adhesion

✍ Scribed by Michiko Sato; Arash Aslani; Marisa A. Sambito; Nader M. Kalkhoran; Elliott B. Slamovich; Thomas J. Webster

Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
560 KB
Volume
84A
Category
Article
ISSN
1549-3296

No coin nor oath required. For personal study only.

✦ Synopsis

Abstract

Bulk hydroxyapatite (HA) and titania have been used to improve the osseointegration of orthopedic implants. For this reason, composites of HA and titania have been receiving increased attention in orthopedics as novel coating materials. The objective of this in vitro study was to produce nanophase (i.e., materials with grain size less than 100 nm) HA/titania coatings on titanium. The adhesion of bone forming cells (osteoblasts) on the composite coatings were also assessed and compared with single‐phase nanotitania and nano‐HA titanium coatings. Nanocrystalline HA powders were synthesized through wet chemistry and hydrothermal treatments at 200°C. Nanocrystalline titania powders obtained commercially were mixed with the nanocrystalline HA powders at various weight ratios. The mixed powders were then deposited on titanium utilizing a room‐temperature coating process called IonTite™. The results of the present study showed that such coatings maintained the chemistry and crystallite size of the original HA and titania powders. Moreover, osteoblasts adherent on single‐phase nanotitania coatings were well‐spread whereas they became more round and extended distinct filopodia on the composite and single‐phase HA coatings. Interestingly, the number of osteoblasts adherent on the nanotitania/HA composite coatings at weight ratios of 2/1 and 1/2 were significantly greater compared with single‐phase nanotitania coatings, currently‐used plasma‐sprayed HA coatings, and uncoated titanium. These findings suggest that nanotitania/HA coatings on titanium should be further studied for improved orthopedic applications. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2008

📜 SIMILAR VOLUMES

Preparation of hydroxyapatite-titania hy
Preparation of hydroxyapatite-titania hybrid coatings on titanium alloy
✍ Serhat Ün; Caner Durucan 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 387 KB

## Abstract Hydroxypapatite‐titania hybrid films on Ti6Al4V alloys were prepared by sol–gel technique by incorporating presynthesized hydroxypapatite (Ca~10~(PO~4~)~6~(OH)~2~ or HAp) powders into a titanium‐alkoxide dip coating solution. Titania network was formed by the hydrolysis and condensation

Biomimetic coating of compound titania a
Biomimetic coating of compound titania and hydroxyapatite on titanium
✍ Lin Zhu; Xun Ye; Guangxin Tang; Nanming Zhao; Yandao Gong; Yuanli Zhao; Jizong Z 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 534 KB

## Abstract The modification on the titanium implant surface is an effective method to improve the biocompatibility of titanium. This article describes efforts to improve implant biocompatibility by applying titania and hydroxyapatite to form a three‐layer coating on the titanium surface. This thre

Increased osteoblast adhesion on titaniu
Increased osteoblast adhesion on titanium-coated hydroxylapatite that forms CaTiO3
✍ Webster, Thomas J. ;Ergun, Celaletdin ;Doremus, Robert H. ;Lanford, William A. 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 182 KB

## Abstract CaTiO~3~ is a strong candidate to form at the interface between hydroxylapatite (HA) and titanium implants during many coating procedures. However, few studies have compared the cytocompatibility properties of CaTiO~3~ to HA pertinent for bone–cell function. For this reason, the objecti

Hydroxyapatite coating on titanium subst
Hydroxyapatite coating on titanium substrate by electrophoretic deposition method: Effects of titanium dioxide inner layer on adhesion strength and hydroxyapatite decomposition
✍ Onder Albayrak; Osman El-Atwani; Sabri Altintas 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 918 KB

Nanosized hydroxyapatite (HA) powders were prepared by a chemical precipitation method and electrophoretically deposited on Ti6Al4V substrates. The powders were calcined before the deposition process in order to obtain crack-free coating surfaces. As an inner layer between Ti6Al4V substrate and HA c