Nanocrystalline hard coatings within the quasi-binary system TiN–TiB2
✍ Scribed by C Mitterer; P Losbichler; F Hofer; P Warbichler; PN Gibson; W Gissler
- Book ID
- 104266027
- Publisher
- Elsevier Science
- Year
- 1998
- Tongue
- English
- Weight
- 526 KB
- Volume
- 50
- Category
- Article
- ISSN
- 0042-207X
No coin nor oath required. For personal study only.
✦ Synopsis
Ti-B-N films with a gradient in the chemical composition were deposited onto austenitic stainless steel sheets by means of unbalanced DC magnetron co-sputtering using a segmented TiN/Tib 2 target. Film microstructure was characterized by means of electron-probe microanalysis (EPMA), transmission electron microscopy (TEM), electron energy-loss spectroscopy (EELS), and X-ray diffraction (XRD) as well as glancing angle X-ray diffraction (GAXRD). The mechanical properties of the coatings were measured using a depth-sensing nanoindenter. The composition of the films was found to lie close to the quasi-binary section TiN-TiB 2 within the ternary system Ti-B-N. The grain size determined from TEM investigations range between 3 and 5 nm. Coatings consisted of a nanocrystalline fcc TiN phase (with boron atoms and oxygen impurities dissolved), and TiB 2 , TiB and B 2 O 3 . Microstructure as well as chemical composition of the films were not influenced significantly by the deposition parameters used in this investigation. Contrary, the mechanical properties were strongly influenced varying the ion bombardment. Hardness values exceeding 50 GPa and elastic moduli close to 500 GPa were obtained.