𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Multiwavelength Brillouin/Erbium-Ytterbium fiber laser

✍ Scribed by S.W. Harun; S.D. Emami; F. Abd Rahman; S.Z. Muhd-Yassin; M.K. Abd-Rahman; H. Ahmad


Publisher
John Wiley and Sons
Year
2007
Tongue
English
Weight
109 KB
Volume
4
Category
Article
ISSN
1612-2011

No coin nor oath required. For personal study only.

✦ Synopsis


A multi-wavelength Brillouin/Erbium-Ytterbium doped fiber laser which operates in the 1535 nm region is proposed and demonstrated. The system employs both linear and nonlinear gain from a 4 meter Erbium-Ytterbium doped fiber and an 8 km single mode fiber respectively to generate an optical comb with a spacing of approximately 0.084 nm. A stable output laser comb of more than 22 lines was obtained with a Brillouin pump of 2 dBm and a 1058 nm pump of 175 mW. A maximum peak power of -4.2 dBm was obtained at a wavelength of 1535.16 nm at these pump power settings while the spectral linewidth of the laser is approximately 8 Hz.


📜 SIMILAR VOLUMES


Tunable multiwavelength Brillouin-Erbium
✍ M.H. Al-Mansoori; M.A. Mahdi; A.K. Zamzuri 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 146 KB

We have demonstrated a new configuration of Brillouin-Erbium fiber laser, in which the Brillouin pump is pre-amplified within the laser cavity before entering the single-mode fiber. By using this simple scheme, a lower external Brillouin pump power is required to create the Brillouin gain and suppre

Efficient multiwavelength generation of
✍ S. W. Harun; N. Tamchek; P. Poopalan; H. Ahmad 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 104 KB

## Abstract An efficient Brillouin/erbium fiber laser, which operates in the 1600‐nm (L‐band) region, is demonstrated for potential applications in future dense‐wavelength division multiplexing communication systems. The laser configuration consists of an L‐band EDFA (to enable L‐band amplification

Low-threshold characteristics of a linea
✍ Mohammed H. Al-Mansoori; Belloui Bouzid; Suhairi Saharudin; Borhanudin M. Ali; M 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 143 KB

## Abstract A novel operation scheme of a multiwavelength Brillouin/Erbium fiber laser (BEFL) utilizing a linear cavity is presented. Twenty‐two stable output laser lines with 10.88‐GHz (0.088‐nm) line spacing at 1558 nm were obtained from this architecture without the need of internal feedback. A

Multiwavelength ytterbium-doped fiber ri
✍ M. R. A. Moghaddam; S. W. Harun; M. C. Paul; M. Pal; A. Dhar; R. Sen; S. Das; S. 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 263 KB

## Abstract A multiwavelength Ytterbium‐doped fiber ring laser operating at 1030 nm region is demonstrated using a Sagnac loop mirror. The Ytterbium‐doped fiber used is drawn from Yb~2~O~3~‐doped perform, which is fabricated through deposition process in conjunction with a solution doping technique

All fiber erbium-ytterbium co-doped fibe
✍ Hua Wang; Yi-Gang Li; Sheng-Ping Chen; Jian-Ping Zhu; Yun Zhang; Tuan-Wei Xu; Ke 📂 Article 📅 2005 🏛 John Wiley and Sons 🌐 English ⚖ 128 KB

## Abstract An all‐fiber erbium‐ytterbium co‐doped fiber laser (EYDFL), with a double‐cladding erbium‐ytterbium co‐doped fiber (EYDF) of 15 m as active fiber, is reported. Up to 1.027‐W output power at 1567.0 nm under pump power of 3.16 W and slope efficiency of 34.5% with respect to the launched p

A dual-band multiwavelength erbium-doped
✍ F. W. Tong; D. N. Wang; Hong Li; W. Jin 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 165 KB

## Abstract A multiwavelength erbium‐doped fiber ring laser is proposed, which is based on two Mach–Zehnder interferometers in a cascade configuration. One of the interferometers acts as a wavelength filter, and the other, exhibiting a relatively small optical path difference, determines the number