✦ LIBER ✦

Multilevel optimal design of thin-walled continuous beams

✍ Scribed by Zvi Friedmax; Maurice B. Fuchs

Publisher: Elsevier Science
Year: 1987
Tongue: English
Weight: 900 KB
Volume: 25
Category: Article
ISSN: 0045-7949
DOI: 10.1016/0045-7949(87)90132-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Optimum design of continuous thin-walled

Optimum design of continuous thin-walled beams

✍ Allen J. Bronowicki; Lewis P. Felton 📂 Article 📅 1975 🏛 John Wiley and Sons 🌐 English ⚖ 552 KB

Optimal shape design for thin-walled bea

Optimal shape design for thin-walled beam cross-sections

✍ Uwe Schramm; Walter D. Pilkey 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 English ⚖ 866 KB

## Abstract Problems of shape optimization for thin‐walled beam cross‐sections are investigated. In particular, shape optimization under torsional loading is treated. The shape of the beam cross‐section is described by non‐uniform rational __B__‐splines (NURBs). Biquadratic and __p__‐version finite

Stiffness analysis of locally-buckled th

Stiffness analysis of locally-buckled thin-walled continuous beams

✍ Shien T. Wang; She T. Jsa 📂 Article 📅 1975 🏛 Elsevier Science 🌐 English ⚖ 794 KB

Optimal design of thin walled I beams fo

Optimal design of thin walled I beams for extreme natural frequency of torsional vibrations

✍ C. Szymczak 📂 Article 📅 1983 🏛 Elsevier Science 🌐 English ⚖ 464 KB

Softening behaviour of continuous thin-w

Softening behaviour of continuous thin-walled steel beams. Two numerical methods

✍ K.T. Thomopoulos; E.S. Mistakidis; E.K. Koltsakis; P.D. Panagiotopoulos 📂 Article 📅 1996 🏛 Elsevier Science 🌐 English ⚖ 622 KB

Analysis for optimal gate design of thin

Analysis for optimal gate design of thin-walled injection molding

✍ Yung-Kang Shen; Chih-Wei Wu; Ya-Feng Yu; Hung-Wei Chung 📂 Article 📅 2008 🏛 Elsevier Science 🌐 English ⚖ 716 KB

The 3C (Computer, Communication and Consumer) product has the properties of being light, thin, short and small. In this study, numerical simulations of three-dimensional injection molding are used for thin-walled product. The governing differential equations are discredited by using control volume f