## Abstract The temperature dependence of the viscous component __E__~2~(1/__T__) of the dynamic modulus is reported for a homologous series of butadiene–styrene copolymers incorporated at various levels in styrene homopolymer. By the use of a vibrating reed technique based on resonance tuning, the
Multi-Scale Analysis of Mechanical Properties of Amorphous Polymer Systems
✍ Scribed by Han E. H. Meijer; Leon E. Govaert
- Publisher
- John Wiley and Sons
- Year
- 2003
- Tongue
- English
- Weight
- 465 KB
- Volume
- 204
- Category
- Article
- ISSN
- 1022-1352
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Use of proper constitutive equations for the intrinsic behavior of glassy polymers (including yield, strain softening and hardening) allows nowadays for analyzing the mechanical response of homogeneous and heterogeneous polymer systems in great detail. Analyses are performed on both the periodic RVE, representative volume element, level and, via a MLFEM, multi‐level finite element method, also on the macroscopic level of e.g. a notched, scratched tensile test bar. Introduction of a failure criterion, in this case the critical tri‐axial stress that initiates crazing, allows for the prediction of brittle‐to‐tough transitions, both as a function of temperature as well as of the absolute critical local material thickness. The analyses give clear suggestions towards possible directions to optimize the microstructure in heterogeneous polymer systems in order to obtain the ultimate toughness of polymers.
Ductile deformation of mechanically rejuvenated polystyrene.
magnified imageDuctile deformation of mechanically rejuvenated polystyrene.
📜 SIMILAR VOLUMES
## Abstract Recent earthquake events evidenced that damage of structural components in a lifeline network may cause prolonged disruption of lifeline services, which eventually results in significant socio‐economic losses in the affected area. Despite recent advances in network reliability analysis,
## Abstract In this work, ternary polymer blends based on polypropylene (PP)/polycarbonate (PC)/poly(styrene‐b‐(ethylene‐__co__‐butylene)‐b‐styrene) (SEBS) triblock copolymer and a reactive maleic anhydride grafted SEBS (SEBS‐__g__‐MAH) at fixed compositions are prepared using twin‐screw extruder a