## Abstract Performing interventions using long conducting wires in MRI introduces the risk of focal RF heating at the wire tip. Comprehensive EM simulations are combined with carefully measured experimental data to show that method‐of‐moments EM field modeling coupled with heat transfer modeling c
MRI thermometry: Fast mapping of RF-induced heating along conductive wires
✍ Scribed by Philipp Ehses; Florian Fidler; Peter Nordbeck; Eberhard D. Pracht; Marcus Warmuth; Peter M. Jakob; Wolfgang R. Bauer
- Publisher
- John Wiley and Sons
- Year
- 2008
- Tongue
- English
- Weight
- 589 KB
- Volume
- 60
- Category
- Article
- ISSN
- 0740-3194
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Conductive implants are in most cases a strict contraindication for MRI examinations, as RF pulses applied during the MRI measurement can lead to severe heating of the surrounding tissue. Understanding and mapping of these heating effects is therefore crucial for determining the circumstances under which patient examinations are safe. The use of fluoroptic probes is the standard procedure for monitoring these heating effects. However, the observed temperature increase is highly dependent on the positioning of such a probe, as it can only determine the temperature locally. Temperature mapping with MRI after RF heating can be used, but cooling effects during imaging lead to a significant underestimation of the heating effect. In this work, an MRI thermometry method was combined with an MRI heating sequence, allowing for temperature mapping during RF heating. This technique may provide new opportunities for implant safety investigations. Magn Reson Med, 2008. © 2008 Wiley‐Liss, Inc.
📜 SIMILAR VOLUMES
In many studies concerning wire heating during MR imaging, a "resonant wire length" that maximizes RF heating is determined. This may lead to the nonintuitive conclusion that adding more wire, so as to avoid this resonant length, will actually improve heating safety. Through a theoretical analysis u