๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

MOVING FORCE IDENTIFICATION: A TIME DOMAIN METHOD

โœ Scribed by S.S. Law; T.H.T. Chan; Q.H. Zeng

Publisher
Elsevier Science
Year
1997
Tongue
English
Weight
494 KB
Volume
201
Category
Article
ISSN
0022-460X

No coin nor oath required. For personal study only.

โœฆ Synopsis

The solution for the vertical dynamic interaction forces between a moving vehicle and the bridge deck is analytically derived and experimentally verified. The deck is modelled as a simply supported beam with viscous damping, and the vehicle/bridge interaction force is modelled as one-point or two-point loads with fixed axle spacing, moving at constant speed. The method is based on modal superposition and is developed to identify the forces in the time domain. Both cases of one-point and two-point forces moving on a simply supported beam are simulated. Results of laboratory tests on the identification of the vehicle/bridge interaction forces are presented. Computation simulations and laboratory tests show that the method is effective, and acceptable results can be obtained by combining the use of bending moment and acceleration measurements.

๐Ÿ“œ SIMILAR VOLUMES

AN INTERPRETIVE METHOD FOR MOVING FORCE
AN INTERPRETIVE METHOD FOR MOVING FORCE IDENTIFICATION
โœ T.H.T. Chan; S.S. Law; T.H. Yung; X.R. Yuan ๐Ÿ“‚ Article ๐Ÿ“… 1999 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 190 KB

Dynamic load data have been valuable for bridge and pavement design. Traditional ways to acquire truck axle and gross weight information are expensive and subject to bias, and this has led to the development of Weigh-in-Motion (WIM) techniques. Most of the existing WIM systems have been developed to

An improved time domain polyreference me
An improved time domain polyreference method for modal identification
โœ Lingmi Zhang; Yingxian Yao; Mingfu Lu ๐Ÿ“‚ Article ๐Ÿ“… 1987 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 772 KB

An improved time domain polyreference method for global model identification is presented in this paper. A time domain preprocessing technique is developed to reduce the effects of random noise contamination on measured data. Compared with the polyreference complex exponential technique, the size of

MOVING FORCES IDENTIFICATION ON A MULTI-
MOVING FORCES IDENTIFICATION ON A MULTI-SPAN CONTINUOUS BRIDGE
โœ X.Q. ZHU; S.S. LAW ๐Ÿ“‚ Article ๐Ÿ“… 1999 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 305 KB

A continuous bridge is modelled as a multi-span continuous Timoshenko beam with non-uniform cross-section. The vibration behaviour of this beam subjected to moving loads is analyzed by Hamilton's principle with the intermediate point constraints represented by very sti! linear springs. A method base