✦ LIBER ✦

Morphology characterization of high-impact resistant polypropylene using AFM and SALS

✍ Scribed by K. Swaminathan; D. W. M. Marr

Book ID: 101340668
Publisher: John Wiley and Sons
Year: 2000
Tongue: English
Weight: 251 KB
Volume: 78
Category: Article
ISSN: 0021-8995
DOI: 10.1002/1097-4628(20001010)78:2<452::aid-app260>3.0.co;2-5

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Study on morphology of high impact polyp

Study on morphology of high impact polypropylene prepared by in situ blending

✍ Tao Jiang; Hongxia Chen; Yingnan Ning; Dongting Kuang; Guangmiao Qu 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 225 KB 👁 2 views

## Abstract High impact polypropylene (HIPP) was prepared by in situ blending of isotactic polypropylene and ethylene–propylene rubber (EPR) with spherical Ziegler–Natta catalyst. Morphology and pore characteristics of such HIPP were investigated by scanning electron microscope, atomic force micros

Separation of High-Impact Polypropylene

Separation of High-Impact Polypropylene Using Interactive Liquid Chromatography

✍ Tibor Macko; Anton Ginzburg; Klaas Remerie; Robert Bruell 📂 Article 📅 2012 🏛 John Wiley and Sons 🌐 English ⚖ 980 KB

Morphology and mechanical properties of

Morphology and mechanical properties of polypropylene/high-impact polystyrene blends from postconsumer plastic waste

✍ Ruth M. Campomanes Santana; Sati Manrich 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 288 KB 👁 2 views

## Abstract The compatibilizing effect of the triblock copolymer poly(styrene‐__b__‐ethylene‐__co__‐butylene‐__b__‐styrene) (SEBS) on the morphological and mechanical properties of virgin and recycled polypropylene (PP)/high‐impact polystyrene (HIPS) blends was studied, with the properties optimize

Study of the kinetics, mass transfer, an

Study of the kinetics, mass transfer, and particle morphology in the production of high-impact polypropylene

✍ P. Kittilsen; T. F. McKenna 📂 Article 📅 2001 🏛 John Wiley and Sons 🌐 English ⚖ 417 KB 👁 2 views

## Abstract A sequence of experimental steps was perfected to produce high‐impact modified polypropylene (PP), and to study the influence of particle morphology and rubber content on the reaction kinetics, especially in terms of mass transfer limitations. It was found that after a critical copolyme

Characterization of the free volume in h

Characterization of the free volume in high-impact polystyrene/polypropylene and high-impact polystyrene/high-density polyethylene blends probed by positron annihilation spectroscopy

✍ Youhua Hu; Chenze Qi; Weiming Liu; Baoyi Wang; Houtian Zheng; Xudong Sun; Xiaomi 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 106 KB 👁 2 views

Polypropylene/high impact polystyrene bl

Polypropylene/high impact polystyrene blend nanocomposites obtained from E-waste: evaluation of mechanical, thermal and morphological properties

✍ Prasanna K. S. Mural; Smita Mohanty; Sanjay K. Nayak; S. Anbudayanidhi 📂 Article 📅 2011 🏛 Springer-Verlag 🌐 English ⚖ 540 KB