✦ LIBER ✦

Morphology and mechanical properties of blends of thermoplastic polyurethane and polyolefins

✍ Scribed by Yali Di; Maoqing Kang; Yuhua Zhao; Shirun Yan; Xinkui Wang

Publisher: John Wiley and Sons
Year: 2005
Tongue: English
Weight: 455 KB
Volume: 99
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.22809

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Factors affecting the morphology and mec

Factors affecting the morphology and mechanical properties of a coagulated thermoplastic polyurethane

✍ K. S. Chian 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 230 KB 👁 1 views

One of the principal failures of current vascular prostheses is compliant mismatch between the host arteries and prostheses at the anastomoses. Current commercial vascular prostheses are fabricated using either microporous poly(tetrafluoroethylene) or poly(ethylene terephthalate), both of which are

Compatibilization of PBT/polyolefin blen

Compatibilization of PBT/polyolefin blends: Mechanical and dynamic mechanical properties

✍ D. Nabi Saheb; J. P. Jog 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 465 KB 👁 1 views

Blends of polybutylene terephthalate (PBT) with very lowdensity polyethylene (VLDPE) have been studied. The blends are immiscible owing to the differences in the polarities of the component polymers. Thermal studies using a differential scanning calorimeter showed that the blending does not change t

Blends of thermoplastic polyurethane and

Blends of thermoplastic polyurethane and polypropylene. I. Mechanical and phase behavior

✍ Emi Govorčin Bajsić; Ivan Šmit; Mirela Leskovac 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 149 KB 👁 1 views

Blends of thermoplastic polyurethanes an

Blends of thermoplastic polyurethanes and polyamide 12: Structure, molecular interactions, relaxation, and mechanical properties

✍ S. S. Pesetskii; V. D. Fedorov; B. Jurkowski; N. D. Polosmak 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 404 KB 👁 1 views

Studies were done to understand the effects of polyamide 12 (PA 12) incorporation on microphase separation (microsegregation) in thermoplastic polyurethanes (TPU) based on oligoether (polytetramethylene oxide, molecular weight, 1000) and oligoester (polyethylene butylene glycol adipate, molecular we

Dynamic mechanical and morphological stu

Dynamic mechanical and morphological studies on the compatibility of plasticized PVC/thermoplastic polyurethane blends

✍ Yiyeon Kim; Won-Jei Cho; Chang-Sik Ha 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 369 KB 👁 1 views

In this work, the compatibility of blends of plasticized poly(vinyl chloride) (p-PVC) and thermoplastic polyurethane (TPU) was investigated using a dynamic mechanical analyzer and scanning electron microscopy. Two kinds of TPU with different ratios of hard to soft segments, i.e., TPU90 and TPU70 wer

Miscibility and mechanical properties of

Miscibility and mechanical properties of sulfonated polystyrene–polyurethane blends

✍ Wei Yang; Jiarui Shen; Shui-Han Zhu; Chi-Ming Chan 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 282 KB 👁 2 views

A sulfonated polystyrene (SPS) and a polyurethane containing a tertiary amine group (NPU) were blended in solution. The effect of blend composition was studied in the blend of SPS with 9.83 mol % of sulfonation (SPS-9.83) and NPU with 33 mol % of MDEA (NPU-33). As the SPS concentration increases, a