✦ LIBER ✦

Morphology and electret behaviour of microcellular high glass temperature films

✍ Scribed by N. Behrendt; C. Greiner; F. Fischer; T. Frese; V. Altstädt; H.-W. Schmidt; R. Giesa; J. Hillenbrand; G.M. Sessler

Publisher: Springer
Year: 2006
Tongue: English
Weight: 358 KB
Volume: 85
Category: Article
ISSN: 1432-0630
DOI: 10.1007/s00339-006-3660-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Electret Properties of Polyetherimides:

Electret Properties of Polyetherimides: Influence of Water Content and Comparison with Other High-Temperature Polymer Films

✍ Thomas Frese; Deliani Lovera; Jan K. W. Sandler; Goy Teck Lim; Volker Altstädt; 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 193 KB

## Abstract In this comparative study, the charge storage performance of commercial high‐temperature polymer films was evaluated and correlated with their chemical structure. Isothermal surface potential decay measurements after annealing periods at 90 °C revealed that amorphous polyetherimide (PEI

Mechanical properties of films prepared

Mechanical properties of films prepared from model high-glass-transition-temperature/low-glass-transition-temperature latex blends

✍ Jiansheng Tang; Eric S. Daniels; Victoria L. Dimonie; Menas S. Vratsanos; Andrew 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 400 KB 👁 2 views

High frequency behaviour of low temperat

High frequency behaviour of low temperature sintered polycrystalline NiCuZn ferrites and their composite thick films

✍ Dimri, Mukesh C. ;Kashyap, Subhash C. ;Dube, D. C. 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 268 KB

## Abstract NiCuZn ferrite nanopowders and polycrystalline bulk samples were prepared by wet chemical (citrate) method followed by sintering at temperatures lower than those for conventional solid‐state ceramic route. The citrate method results in nanopowders. The addition of copper promotes sinter

Effect of glycerol on solution propertie

Effect of glycerol on solution properties governing morphology, glass transition temperature, and tensile properties of electrospun zein film

✍ Saowakon Wongsasulak; Paranat Tongsin; Narupol Intasanta; Tipaporn Yoovidhya 📂 Article 📅 2010 🏛 John Wiley and Sons 🌐 English ⚖ 484 KB 👁 2 views

## Abstract An attempt was made to improve the tensile strength and elongation of electrospun zein film by addition of a plasticizer, namely, glycerol to the film forming solution. A surfactant viz. Tween®40 and NaCl were also added into the film solution to facilitate the electrospinning process.