Modification of the sheet resistance of ink jet printed polymer conducting films by changing the plastic substrate

✍ Scribed by A.Y. Natori; C.D. Canestraro; L.S. Roman; A.M. Ceschin

• Book ID: 103843221
• Publisher: Elsevier Science
• Year: 2005
• Tongue: English
• Weight: 146 KB
• Volume: 122
• Category: Article
• ISSN: 0921-5107
• DOI: 10.1016/j.mseb.2004.11.026

✦ Synopsis

The ink jet printing technology is a relatively novel technique in development of organic electronic devices. The technique consists of working out depositions of organic layers by a piezo-based ink jet printer. In this work polymer conducting films deposited by ink jet printing technique on different plastic substrates has been demonstrated. The poly(3,4-ethylenedioxythiofene)/poly(4-styrenesulfonate) [PEDOT/PSS] and glycerol-modified PEDOT/PSS [G-PEDOT/PSS] were used like conducting inks to be applied on polyester and polyethylene terephthalate (PET) substrates. By means of the change of substrate associated to the deposition number or type of polymer ink used for printing of the conducting films, the sheet resistance can be modified. Such a behavior suggests that plastic substrate fulfills an important role for the changing of sheet resistance of the PEDOT/PSS and G-PEDOT/PSS films made by ink jet printing technique. Films obtained from this technique on different plastic substrates might represent a significant step toward the development and improvement of organic electronic devices.