✦ LIBER ✦

Modification of the physical, mechanical and thermal properties of poly(vinyl chloride) by blending with poly(ethyl methacrylate)

✍ Scribed by Rupa Chakrabarti; Debabrata Chakraborty

Publisher: John Wiley and Sons
Year: 2007
Tongue: English
Weight: 367 KB
Volume: 105
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.26256

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Modification of poly(vinyl chloride) by

Modification of poly(vinyl chloride) by IPN formation with poly(ethyl acrylate)

✍ Rupa Chakrabarti; Debabrata Chakraborty 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 355 KB 👁 1 views

Mechanical properties of blends of PAMAM

Mechanical properties of blends of PAMAM dendrimers with poly(vinyl chloride) and poly(vinyl acetate)

✍ Carlos M. Nunez; Anthony L. Andrady; Rong K. Guo; Jesse N. Baskir; David R. Morg 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 147 KB 👁 2 views

Hybrid blends of poly(amidoamine) PAMAM dendrimers with two linear high polymers, poly(vinyl chloride), PVC, and poly(vinyl acetate), PVAc, are reported. The interaction between the blend components was studied using dynamic mechanical analysis, xenon nuclear magnetic resonance (NMR) spectroscopy, a

Modification of chlorinated poly(vinyl c

Modification of chlorinated poly(vinyl chloride) by blending with epoxidized polybutadiene

✍ Dionissia D. Sotiropoulou; Kostas G. Gravalos; Nikos K. Kalfoglou 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 427 KB 👁 1 views

The compatibility of epoxidized poly (cis-1,4-butadiene) (EPB) with chlorinated polyvinylchloride ( CPVC ) was investigated. Blends studied covered the complete composition range using EPB at two degrees of epoxidation: 20 and 43 mol % oxirane units. Tensile properties of EPB(63)/CPVC were also stud

Thermal modification of poly(vinyl chlor

Thermal modification of poly(vinyl chloride) and formation of dehydrochlorinated poly(vinyl chloride)–poly(methyl methacrylate) polymer blend in the process of foaming: Identification and application

✍ M. Jayabalan 📂 Article 📅 1982 🏛 John Wiley and Sons 🌐 English ⚖ 454 KB 👁 1 views

Impact resistant plastic foam of dehydrochlorinated poly(viny1 chloride) (DHPVC)-poly(methy1 methacrylate) (PMMA) was prepared for cryogenic insulation in space vehicle by the method of compression molding and chemical blowing. Impact resistance was achieved by the formation of the polymer blend, de

Preparation and application of low molec

Preparation and application of low molecular weight poly(vinyl chloride). III. Mechanical properties of blended poly(vinyl chloride)

✍ Kikuo Yamamoto; Takashi Maehala; Katsuo Mitani; Yukio Mizutani 📂 Article 📅 1993 🏛 John Wiley and Sons 🌐 English ⚖ 395 KB 👁 2 views

Mechanical properties of poly(vinyl chlo

Mechanical properties of poly(vinyl chloride) blends and corresponding graft copolymers

✍ Wen-Fu Lee; Chung-Ching Lai 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 255 KB 👁 2 views

The mechanical properties of the poly(vinyl chloride) (PVC) and poly(glycidyl methacrylate) [poly(GMA)] blend system and the PVC and poly(hydroxyethyl methacrylate) [poly(HEMA)] blend system and their crosslinked films were investigated. At the same time, the mechanical properties for the correspond