𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Modification of bamboo-based activated carbon using microwave radiation and its effects on the adsorption of methylene blue

✍ Scribed by Qing-Song Liu; Tong Zheng; Nan Li; Peng Wang; Gulizhaer Abulikemu


Publisher
Elsevier Science
Year
2010
Tongue
English
Weight
211 KB
Volume
256
Category
Article
ISSN
0169-4332

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Surface chemistry of wood-based phosphor
✍ FS Baker; RA Daley; RH Bradley πŸ“‚ Article πŸ“… 2005 πŸ› Wiley (John Wiley & Sons) 🌐 English βš– 124 KB πŸ‘ 1 views

## Abstract The surface oxygen content of selected wood‐based phosphoric acid‐activated carbons was quantified using X‐ray photoelectron spectroscopy (XPS) and correlated with the residual bulk phosphate levels of the carbons and their adsorptivity in solution. The adsorption of Al^3+^, Cu^2+^, and

The modification of pore size in activat
✍ Yuji Kawabuchi; Hidetoshi Oka; Shizuo Kawano; Isao Mochida; Noriko Yoshizawa πŸ“‚ Article πŸ“… 1998 πŸ› Elsevier Science 🌐 English βš– 655 KB

Pore size control of a series of activated carbon fibers was attempted by chemical vapor deposition (CVD) of benzene to clarify the influence of the pore distribution on the development of molecular sieving ability. Weight increase by CVD was found to saturate at a certain level respective to the fi

Surface modification of carbon/epoxy pre
✍ M.H. Kim; K.Y. Rhee; H.J. Kim; D.H. Jung πŸ“‚ Article πŸ“… 2007 πŸ› Elsevier Science 🌐 English βš– 689 KB

It was shown in previous study that the fracture toughness of carbon/epoxy laminated composites could be significantly improved by modifying the surface of the prepreg using Ar + irradiation in an oxygen environment. In this study, the surface of carbon/epoxy prepreg was modified using an oxygen pla