Despite the wealth of soil erosion models available for the prediction of both runoff and soil loss at a variety of scales, little quantification is made of uncertainty and error associated with model output. This in part reflects the need to produce unequivocal or optimal results for the end user,
Modelling water erosion in the Sahel: application of a physically based soil erosion model in a gentle sloping environment
✍ Scribed by S. M. Visser; G. Sterk; D. Karssenberg
- Publisher
- John Wiley and Sons
- Year
- 2005
- Tongue
- English
- Weight
- 715 KB
- Volume
- 30
- Category
- Article
- ISSN
- 0360-1269
- DOI
- 10.1002/esp.1212
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Water is a major limiting factor in arid and semi‐arid agriculture. In the Sahelian zone of Africa, it is not always the limited amount of annual rainfall that constrains crop production, but rather the proportion of rainfall that enters the root zone and becomes plant‐available soil moisture. Maximizing the rain‐use efficiency and therefore limiting overland flow is an important issue for farmers. The objectives of this research were to model the processes of infiltration, runoff and subsequent erosion in a Sahelian environment and to study the spatial distribution of overland flow and soil erosion.
The wide variety of existing water erosion models are not developed for the Sahel and so do not include the unique Sahelian processes. The topography of the Sahelian agricultural lands in northern Burkina Faso is such that field slopes are generally low (0–5°) and overland flow mostly occurs in the form of sheet flow, which may transport large amounts of fine, nutrient‐rich particles despite its low sediment transport capacity. Furthermore, pool formation in a field limits overland flow and causes resettlement of sediment resulting in the development of a surface crust.
The EUROSEM model was rewritten in the dynamic modelling code of PCRaster and extended to account for the pool formation and crust development. The modelling results were calibrated with field data from the 2001 rainy season in the Katacheri catchment in northern Burkina Faso. It is concluded that the modified version of EUROSEM for the Sahel is a fully dynamic erosion model, able to simulate infiltration, runoff routing, pool formation, sediment transport, and erosion and deposition by inter‐rill processes over the land surface in individual storms at the scale of both runoff plots and fields. A good agreement is obtained between simulated and measured amounts of runoff and sediment discharge. Incorporating crust development during the event may enhance model performance, since the process has a large influence on infiltration capacity and sediment detachment in the Sahel. Copyright © 2005 John Wiley & Sons, Ltd.
📜 SIMILAR VOLUMES
Accurate estimations of water retention and detention are needed to simulate surface runoff and soil erosion following a rainfall event in a catchment. Several equations to estimate the amount of surface depressional storage, the fraction of the soil surface covered by water and the amount of rainfa
## Abstract Watershed scale hydrological and biogeochemical models rely on the correct spatial‐temporal prediction of processes governing water and contaminant movement. The Soil and Water Assessment Tool (SWAT) model, one of the most commonly used watershed scale models, uses the popular curve num
## Abstract A spatially distributed Xinanjiang model (DXAJ) has been developed to simulate the hourly hydrological process of a storm event caused by Typhoon No. 11 during the period of the 22–23 August 2001 in the Kamafusa Lake catchment, Miyagi Prefecture, Japan. The catchment is divided into 50
## Abstract An Erratum has been published for this article in Hydrological Processes 16(5) 2002, 1130–1130. A profile‐based, analytical hillslope erosion model (HEM) is integrated into a geographical information system (GIS) framework to provide a tool to assess the impact of the Cerro Grande fire