✦ LIBER ✦

Modelling of reinforced polymer composites subject to thermo-mechanical loading

✍ Scribed by M. R. E. Looyeh; A. Samanta; S. Jihan; J. McConnachie

Publisher: John Wiley and Sons
Year: 2005
Tongue: English
Weight: 412 KB
Volume: 63
Category: Article
ISSN: 0029-5981
DOI: 10.1002/nme.1309

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

POSTBUCKLING AND VIBRATION CHARACTERISTI

POSTBUCKLING AND VIBRATION CHARACTERISTICS OF PIEZOLAMINATED COMPOSITE PLATE SUBJECT TO THERMO-PIEZOELECTRIC LOADS

✍ I.K. OH; J.H. HAN; I. LEE 📂 Article 📅 2000 🏛 Elsevier Science 🌐 English ⚖ 276 KB

Postbuckling and vibration analyses considering large thermopiezoelastic de#ections are performed for fully symmetric and partially eccentric piezolaminated composite plates. Non-linear "nite element equations based on the layerwise displacement theory are formulated for piezolaminated plates subjec

Predictive modeling of the mechanical pr

Predictive modeling of the mechanical properties of particulate hydroxyapatite reinforced polymer composites

✍ Bala?, Igor ;Uskokovi?, Petar S. ;Aleksi?, Radoslav ;Uskokovi?, Dragan 📂 Article 📅 2002 🏛 John Wiley and Sons 🌐 English ⚖ 660 KB

## Abstract The influence of particle geometry and volume fraction on the mechanical properties of a hydroxyapatite (HAp) particulate reinforced polymer (poly‐L‐lactide and collagen) matrix composite was investigated through finite‐element (FE) analysis. For cube‐shaped (near sharp and curved corne

A contribution to computational modellin

A contribution to computational modelling of reinforced concrete structures subjected to impact loadings

✍ Vladislav Adamík; Peter Matejovič 📂 Article 📅 1989 🏛 Elsevier Science 🌐 English ⚖ 674 KB

Failure of mechanically loaded laminated

Failure of mechanically loaded laminated composites subjected to intense localized heating

✍ R. C. Gularte; J. A. Nemes; F. R. Stonesifer; C. I. Chang 📂 Article 📅 1988 🏛 John Wiley and Sons 🌐 English ⚖ 464 KB

A numerical procedure is presented for predicting failure in laminated composites subjected to simultaneous intense localized heating and applied mechanical loads. The method consists of a non-linear two-dimensional, axisymmetric finite difference thermal analyser which considers the effects of surf

Accurate determination of transverse nor

Accurate determination of transverse normal stresses in hybrid laminated panels subjected to electro-thermo-mechanical loadings

✍ Moinuddin Malik; Ahmed K. Noor 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 258 KB

A computational procedure is presented for the accurate determination of transverse normal stresses in hybrid laminated panels consisting of ÿbre-reinforced composite and piezoelectric layers, and subjected to mechanical, thermal and electrical loadings. The three key elements of the procedure are:

Interphase modeling of copper-epoxy part

Interphase modeling of copper-epoxy particulate composites subjected to static and dynamic loading

✍ G. C. Papanicolaou; A. G. Xepapadaki; A. Kotrotsos; D. E. Mouzakis 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 529 KB

## Abstract In this investigation, the static and dynamic behavior of copper‐filled epoxy particulate composites has been experimentally studied. The influence of particle‐weight fraction (0–25%), on the static behavior and filler concentration, temperature and frequency on the dynamic behavior of