𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Modelling, design and realization of micromachined millimetre-wave band-pass filters

✍ Scribed by Giancarlo Bartolucci; Dan Neculoiu; Mircea Dragoman; Flavio Giacomozzi; Romolo Marcelli; Alexandru Müller

Publisher
John Wiley and Sons
Year
2003
Tongue
English
Weight
163 KB
Volume
31
Category
Article
ISSN
0098-9886

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Design of wide-band band-pass filters us
Design of wide-band band-pass filters using discrete-time domain techniques
✍ Lin-Chuan Tsai; Kuo-Lung Chen; Ching-Wen Hsue 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 97 KB

## Abstract A transmission‐line configuration consisting of equal‐length two‐section open stubs, serial lines, and short stubs is employed to emulate the Z‐domain transfer function of a wideband band‐pass filter. Both mitering and slots are used to reduce the discontinuity effect caused by the abru

Simple modelling of DGS to design 1D-PBG
Simple modelling of DGS to design 1D-PBG low-pass filters
✍ Ieltxu Garde; Miguel Javier Yábar; Carlos del Río 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 296 KB

## Abstract The use of defected ground structures (DGSs) is being intensively explored by microwave filter designers. DGSs are one possible implementation of a 1D photonic band gap (1D‐PBG), in which some defect structures are patterned on the ground plane of a microstrip circuit. In this paper, th

Experimental characterization of inducti
Experimental characterization of inductive notches in finline and realization of millimeter-wave low-pass filter
✍ S. Grover; B. Bhat; S. K. Koul 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 130 KB

This paper presents the realization of low-pass filters in finline configuration. The filter consists of a cascade of inducti¨e notches in an asymmetric bilateral finline, and is designed through experimental characterization of notches and CAD optimization. A typical fi¨e-notch low-pass filter desi

Accurate circuit models of CPW coupling
Accurate circuit models of CPW coupling elements for the design of compact quarter-wavelength band-pass filters
✍ Jing Gao; Lei Zhu 📂 Article 📅 2004 🏛 John Wiley and Sons 🌐 English ⚖ 389 KB

Accurate equivalent-circuit models of several types of coplanar waveguide (CPW) coupling elements are presented and their parameters are derived by employing the so-called short-open calibration (SOC) technique into the full-wave method of moments (MoM). Our brief description is firstly made on the

Design and analysis of on-package dual-m
Design and analysis of on-package dual-mode band pass filters for highly integrated wireless transceivers
✍ Ming-Sze Tong; Yinchao Chen; Qunsheng Cao; Mingwu Yang; Ronan Sauleau 📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 198 KB

## Abstract In this paper, various planar printed microwave bandpass filters (BPFs) are designed and analyzed by applying a nonuniform finite‐difference time‐domain (NU‐FDTD) method. These filters, referred to as integrated‐circuit package filters (ICPFs), are designed in such a way that they opera

Ming-Sze Tong, Yinchao Chen, Qunsheng Ca
Ming-Sze Tong, Yinchao Chen, Qunsheng Cao, Mingwu Yang, and Ronan Sauleau, Design and analysis of on-package dual-mode band pass filters for highly integrated wireless transceivers, Microwave and Optical Technology Letters(2006) 48(4) 756-760
📂 Article 📅 2006 🏛 John Wiley and Sons 🌐 English ⚖ 33 KB

## Abstract The original article to which this erratum refers was published in __Microwave and Optical Technology Letters__ Microwave Opt Technol Lett (2006) 48(4) 756