✦ LIBER ✦

Modelling and simulation of trickle-bed reactors using computational fluid dynamics: A state-of-the-art review

✍ Scribed by Yining Wang; Jinwen Chen; Faical Larachi

Book ID: 112051904
Publisher: John Wiley and Sons
Year: 2011
Tongue: English
Weight: 695 KB
Volume: 91
Category: Article
ISSN: 0008-4034
DOI: 10.1002/cjce.20702

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Simulations of photodegradation of tolue

Simulations of photodegradation of toluene and formaldehyde in a monolith reactor using computational fluid dynamics

✍ Siewhui Chong; Shaobin Wang; Moses Tadé; H. Ming Ang; Vishnu Pareek 📂 Article 📅 2010 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 937 KB

In this study, simulations were conducted on a monolith reactor for the photodegradation of toluene and formaldehyde. The monoliths in the reactor were treated as porous zones and the photocatalytic oxidation occurring on the monolith surfaces was modeled using Langmuir-Hinshelwood kinetics. A discr

Modeling and simulation of a parallel pl

Modeling and simulation of a parallel plate heat sink using computational fluid dynamics

✍ R. Arularasan; R. Velraj 📂 Article 📅 2008 🏛 Springer 🌐 English ⚖ 173 KB

Modeling and control of fluid dispensing

Modeling and control of fluid dispensing processes: a state-of-the-art review

✍ X. B. Chen 📂 Article 📅 2008 🏛 Springer 🌐 English ⚖ 238 KB

Materials, fluid dynamics, and solid mec

Materials, fluid dynamics, and solid mechanics aspects of coronary artery stents: A state-of-the-art review

✍ Gladius Lewis 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 English ⚖ 223 KB

## Abstract It is well known that, across all populations (based on geographic location, race, ethnicity, age, and sex), coronary artery disease (CAD) is the single most common cause of death. The commonly performed revascularization procedures for the treatment of symptomatic CAD are percutaneous

Cold flow model and computer simulation

Cold flow model and computer simulation studies of a circulating fluidized bed reactor for the oxidative coupling of methane

✍ G.J. Tjatjopoulos; P.T. Ketekides; D.K. Iatrides; I.A. Vasalos 📂 Article 📅 1994 🏛 Elsevier Science 🌐 English ⚖ 819 KB

Simulation of the fluid dynamics of a bu

Simulation of the fluid dynamics of a bubbling fluidized bed. Experimental validation of the two-fluid model and evaluation of a parallel multiblock solver

✍ H. Enwald; E. Peirano; A.E. Almstedt; B. Leckner 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 515 KB

A mesh refinement study and validation of two-fluid model closures were carried out for a bubbling fluidized bed application. The mesh refinement study indicates that a higher degree of mesh refinement is required for atmospheric than for pressurized fluidization. Statistical bubble parameters (bubb