𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Modelling and simulation of the reversed flow operation of a fixed-bed reactor for methanol synthesis

✍ Scribed by K.M. Vanden Bussche; S.N. Neophytides; I.A. Zolotarskii; G.F. Froment

Book ID
107730801
Publisher
Elsevier Science
Year
1993
Tongue
English
Weight
1010 KB
Volume
48
Category
Article
ISSN
0009-2509

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Modelling of the reversed flow fixed bed
Modelling of the reversed flow fixed bed reactor for catalytic decontamination of waste gases
✍ Assoc. Prof. Georgi G. Grozev; Dipl.-Ing. Christo G. Sapundzhiev πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 508 KB

Catalytic decontamination of waste gases in a fixed bed reactor, operating at non-steady state conditions achieved by periodic gas flow reversal, is simulated on the basis of a mathematical model. The opportunity to utilize a significant part of the reaction heat is discussed and the effect of catal

Modelling and simulation of a mixed-flow
Modelling and simulation of a mixed-flow reactor for ammonia and methanol synthesis
✍ Chue-San Yoo; Anthony G. Dixon πŸ“‚ Article πŸ“… 1988 πŸ› Elsevier Science 🌐 English βš– 680 KB

The use of mixed axial and radial flows in a fixed-bed adiabatic reactor can lead to regions of flow "back-up" in the bed. These regions cause temperature hot-spots to appear, even under conditions where there are none for a purely radial flow. The hot-spots can be reduced by balancing axial and rad