✦ LIBER ✦

Modelling and FE-simulation of plastic ductile damage evolution in plates and shells

✍ Scribed by I. Kreja; R. Schmidt; D. Weichert

Publisher: Springer
Year: 2001
Tongue: English
Weight: 247 KB
Volume: 71
Category: Article
ISSN: 0939-1533
DOI: 10.1007/s004190000117

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Coupling of micro- and macro-damage mode

Coupling of micro- and macro-damage models for the simulation of damage evolution in ductile materials

✍ C. Könke 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 825 KB

Ductile damage analysis of elasto-plasti

Ductile damage analysis of elasto-plastic shells at large inelastic strains

✍ Andreas Eckstein; Yavuz Başar 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 346 KB 👁 1 views

The objective of this contribution is to model ductile damage phenomena under consideration of large inelastic strains, to couple the corresponding constitutive law with a multi-layer shell kinematics and to give ÿnally an adequate ÿnite element formulation. An elastic-plastic constitutive law is fo

Aspects of ductile fracture and adaptive

Aspects of ductile fracture and adaptive mesh refinement in damaged elasto-plastic materials

✍ M. Vaz Jr.; D. R. J. Owen 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 519 KB

Simulation of thermal ageing and radiati

Simulation of thermal ageing and radiation damage in Fe–Cr

✍ Janne Wallenius; Pär Olsson; Lorenzo Malerba; Dmitry Terentyev 📂 Article 📅 2007 🏛 Elsevier Science 🌐 English ⚖ 533 KB

Numerical simulation and experimental va

Numerical simulation and experimental validation of a ductile damage model for DIN 1623 St14 steel

✍ Farhad Haji Aboutalebi; Mahmoud Farzin; Mehrdad Poursina 📂 Article 📅 2010 🏛 Springer 🌐 English ⚖ 570 KB

Experimental study and constitutive mode

Experimental study and constitutive modelling of elasto-plastic damage in heat-treated mortar

✍ Xiao-Ting Chen; J. F. Shao; C. A. Davy; F. Skoczylas 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 472 KB

## Abstract This study investigates the effect of a heat‐treatment upon the thermo‐mechanical behaviour of a model cement‐based material, i.e. a normalized mortar, with a (__w__/__c__) ratio of 0.5. First, a whole set of __varied__ experimental results is provided, in order to either identify or va