✦ LIBER ✦

Modelling and control of an air-to-air heat recovery system

✍ Scribed by M. Zaheer-Uddin; J.C.Y. Wang

Book ID: 108018316
Publisher: Elsevier Science
Year: 1994
Tongue: English
Weight: 533 KB
Volume: 14
Category: Article
ISSN: 0890-4332
DOI: 10.1016/0890-4332(94)90005-1

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

97/01428 Air pollution control and heat

97/01428 Air pollution control and heat recovery system

📂 Article 📅 1997 🏛 Elsevier Science ⚖ 212 KB

14 Environment (pollution, health protection, safety) gas 802 as the raw material for a 803 conditioning system, and a promising new additive which performed well in laboratory-and pilot-scale tests. A second retrofit technology supplements all or most existing electrostatic precipitators with a pul

Practical thermal design of run-around a

Practical thermal design of run-around air-to-air heat recovery system

✍ Joseph C.Y. Wang 📂 Article 📅 1985 🏛 Elsevier Science ⚖ 383 KB

Discharge air system: modelling and opti

Discharge air system: modelling and optimal control

✍ G. R. Zheng; M. Zaheer-Uddin 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 159 KB 👁 2 views

A state-space model of a discharge air system (DAS) is developed. Simulation results obtained from the developed model compare well with the published experimental data. The optimal control strategies and optimal performance of DAS to step changes in setpoints are given for two cases: a heating cas

Evaluation of an air-to-air heat exchang

Evaluation of an air-to-air heat exchanger

✍ A. Persily 📂 Article 📅 1982 🏛 Elsevier Science 🌐 English ⚖ 827 KB

Heating, ventilation and air conditionin

Heating, ventilation and air conditioning system modelling

✍ R. Whalley; A. Abdul-Ameer 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 793 KB

00/00483 Discharge air system: modelling

00/00483 Discharge air system: modelling and optimal control

📂 Article 📅 2000 🏛 Elsevier Science ⚖ 218 KB

The paper attempts to show the importance of economic optimization of large capacity or industrial refrigeration systems. It also presents the results and conclusions obtained by a computer software which was developed specifically to determine the economic optimum values of the design parameters of