✦ LIBER ✦

Modeling the solids conveying zone of a novel extruder

✍ Scribed by Mingyin Jia; Kejian Wang; Ping Xue; Fuhua Zhu

Publisher: John Wiley and Sons
Year: 2007
Tongue: English
Weight: 384 KB
Volume: 107
Category: Article
ISSN: 0021-8995
DOI: 10.1002/app.27237

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Cohesive-driven particle circulation in

Cohesive-driven particle circulation in the solids conveying zone of a single-screw extruder

✍ Michael R. Thompson; Abdullah S. Al Otaibi; Junfeng Sun 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 453 KB 👁 2 views

Solid transportation in the feeding zone

Solid transportation in the feeding zone of intermeshing co-rotating twin-screw extruders

✍ A. C. -Y. Wong; T. Liu; F. Zhu 📂 Article 📅 2000 🏛 Springer 🌐 English ⚖ 865 KB

Investigation of the capacity of the cha

Investigation of the capacity of the charging zone of a single-screw extruder

✍ B. A. Petrov; V. V. Skachkov; V. S. Kim; K. A. Salazkin 📂 Article 📅 1976 🏛 Springer 🌐 English ⚖ 586 KB

Dynamics of a polycaproamide melt in the

Dynamics of a polycaproamide melt in the disk zone of a combination extruder

✍ V. N. Bondarenko; V. I. Panchuk 📂 Article 📅 1982 🏛 Springer 🌐 English ⚖ 257 KB

Material distribution in the partially f

Material distribution in the partially filled zone of a twin-screw extruder

✍ Robbert A. de Graaf; Dolf. J. Woldringh; Léon P. B. M. Janssen 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 151 KB 👁 2 views

Simulation of monomeric material transport in reactive extrusion revealed that two different situations can be distinguished in the partially filled zone of a twin-screw extruder. Material is transported from the bottom of the barrel to the top of the screw by drag or material remains on the bottom

Modeling the reactive modification of HD

Modeling the reactive modification of HDPE in a nonintermeshing twin screw extruder

✍ M. R. Thompson; A. N. Hrymak; A. E. Hamielec 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 English ⚖ 782 KB