✦ LIBER ✦

Modeling of thermal stresses and lifetime prediction of planar solid oxide fuel cell under thermal cycling conditions

✍ Scribed by Lin Liu; Gap-Yong Kim; Abhijit Chandra

Book ID: 108192996
Publisher: Elsevier Science
Year: 2010
Tongue: English
Weight: 541 KB
Volume: 195
Category: Article
ISSN: 0378-7753
DOI: 10.1016/j.jpowsour.2009.10.064

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Thermal stress modeling of anode support

Thermal stress modeling of anode supported micro-tubular solid oxide fuel cell

✍ Daan Cui; Mojie Cheng 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 936 KB

Thermal modeling and simulation of an in

Thermal modeling and simulation of an integrated solid oxide fuel cell and charcoal gasification system

✍ C. Ozgur Colpan; Yeong Yoo; Ibrahim Dincer; Feridun Hamdullahpur 📂 Article 📅 2009 🏛 American Institute of Chemical Engineers 🌐 English ⚖ 269 KB

Fabrication, electrochemical characteriz

Fabrication, electrochemical characterization and thermal cycling of anode supported microtubular solid oxide fuel cells

✍ R. Campana; R.I. Merino; A. Larrea; I. Villarreal; V.M. Orera 📂 Article 📅 2009 🏛 Elsevier Science 🌐 English ⚖ 482 KB

Thermal cycling and degradation mechanis

Thermal cycling and degradation mechanisms of compressive mica-based seals for solid oxide fuel cells

✍ Yeong-shyung Chou; Jeffry W Stevenson 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 766 KB

Modeling of the effective elastic and th

Modeling of the effective elastic and thermal properties of glass-ceramic solid oxide fuel cell seal materials

✍ J. Milhans; S. Ahzi; H. Garmestani; M.A. Khaleel; X. Sun; B.J. Koeppel 📂 Article 📅 2009 🏛 Elsevier Science ⚖ 812 KB

Effect of alumina on the curvature, Youn

Effect of alumina on the curvature, Young's modulus, thermal expansion coefficient and residual stress of planar solid oxide fuel cells

✍ Chang Rong He; Wei Guo Wang; Jianxin Wang; Yejian Xue 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 530 KB

Planar solid oxide fuel cells (SOFCs) are composites consisting of porous and dense functional layers as electrodes and electrolytes, respectively. Because of the thermo-elastic mismatch between the individual layers, residual stresses develop during manufacturing and cause unconstrained cells to wa