𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Modeling of the Mixing of Particulate Materials in Continuous-Circulating Mixers

✍ Scribed by V. F. Pershin; Yu. T. Selivanov

Book ID
111613018
Publisher
Springer
Year
2003
Tongue
English
Weight
46 KB
Volume
37
Category
Article
ISSN
0040-5795

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

The measurement of mixing efficiency of
The measurement of mixing efficiency of continuous mixers
✍ S. Lehtola; R. KuoppamΓ€ki πŸ“‚ Article πŸ“… 1982 πŸ› Elsevier Science 🌐 English βš– 523 KB

A radiotracer method for testing the mixing characteristics of industrial continuous mixers in actual process conditions is described. The tracer is fed into the input of the mixer at a constant rate and the radiation in the output is measured by two properly collimated radiation detectors. The meas

Modeling of mixing in internal mixers wi
Modeling of mixing in internal mixers with long blade tips
✍ V. Nassehi; M. H. R. Ghoreishy πŸ“‚ Article πŸ“… 2001 πŸ› John Wiley and Sons 🌐 English βš– 426 KB πŸ‘ 2 views

## Abstract It is well known that blade geometry significantly affects the performance and efficiency of partially filled internal mixers. Intermesh type blades with very long tips are regarded as effective alternatives to almond‐shaped blades used in more traditional tangential rotor mixers. Howev

On the modeling of continuous mixers. Pa
On the modeling of continuous mixers. Part II: The cokneader
✍ P. H. M. Elemans; H. E. H. Meijer πŸ“‚ Article πŸ“… 1990 πŸ› Society for Plastic Engineers 🌐 English βš– 974 KB

## Abstract The Buss cokneader is a single‐screw extruder with interrupted flights. Pins from the barrel are inserted into the screw channel. The screw is both rotating and oscillating. Due to this action, screw flights are continuously wiped by the pins. During one passage of the pin, the material