Previously published material on the ␣-methyl styrene/methyl methacrylate (␣-MS/MMA) copolymer system at temperatures above the ceiling temperature of ␣-MS has focused on low-conversion results. Several attempts have been made to estimate copolymer reactivity ratios from experimental data, but in mo
Modeling of the copolymerization, with depropagation, of α-methyl styrene and methyl methacrylate at an elevated temperature
✍ Scribed by Seong Ill Cheong; A. Penlidis
- Publisher
- John Wiley and Sons
- Year
- 2004
- Tongue
- English
- Weight
- 147 KB
- Volume
- 93
- Category
- Article
- ISSN
- 0021-8995
No coin nor oath required. For personal study only.
📜 SIMILAR VOLUMES
In order to calculate some kinetic parameters, such as the reactivity ratios, of the system ␣-methylstyrene-methyl methacrylate, the bulk copolymerization of these two monomers with azobis isobutironitrile (AIBN) as a radical initiator was studied. Experiments were performed at the various temperatu
a-Methylstyrene ( a-MSt) and methyl methacrylate were copolymerized at 60ЊC in toluene by radical polymerization induced by azobisisobutyronitrile. The kinetics were followed by gravimetry and correlated with the molecular weights, microstructure, and glass transition temperature. A model was develo
The copolymerization of styrene and methyl methacrylate with two monomeric fluorescent dyes, benzanthrone derivatives, have been investigated. The most suitable parameters of the process were determined. The copolymers obtained had an intensive stable to solvent color and fluorescence, due to the ch
## Abstract A mathematical model was developed for simulating the batch copolymerization of styrene (St) and methyl methacrylate (MMA) in the presence of polybutadiene (PB). It was adjusted to the measurements of three reactions carried out at 65°C, with initial comonomers ratio at the azeotropic c