✦ LIBER ✦

Modeling of texture development during recrystallization of interstitial free steel

✍ Scribed by Y. Hayakawa; J.A. Szpunar

Publisher: Elsevier Science
Year: 1997
Tongue: English
Weight: 935 KB
Volume: 45
Category: Article
ISSN: 1359-6454
DOI: 10.1016/s1359-6454(96)00353-9

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

A comprehensive model of recrystallizati

A comprehensive model of recrystallization for interstitial free steel

✍ Y. Hayakawa; J.A. Szpunar 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 892 KB

A new model of Goss texture development

A new model of Goss texture development during secondary recrystallization of electrical steel

✍ Y. Hayakawa; J.A. Szpunar 📂 Article 📅 1997 🏛 Elsevier Science 🌐 English ⚖ 852 KB

A new model of Goss texture development during the secondary recrystallization of electrical steel is proposed and tested in this paper. This model is based on the assumption that high-energy boundaries have high grain boundary diffusion coefficients. High diffusion coefficients facilitate precipita

Thermodynamics of precipitation and text

Thermodynamics of precipitation and textural development in batch-annealed interstitial-free high-strength steels

✍ Pampa Ghosh; Chiradeep Ghosh; R.K. Ray 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 457 KB

A systematic and detailed characterization of precipitates, as a function of steel composition, has been carried out in five batchannealed interstitial-free high-strength steels. The precipitation behavior has been discussed from the point of view of thermodynamics as well as on the basis of the kin

Physical parameters related to the devel

Physical parameters related to the developments of recrystallization textures in an ultra low carbon steel

✍ I Samajdar; B Verlinden; L Kestens; P Van Houtte 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 824 KB

AbstractÐDevelopments in deformation and recrystallization textures were studied in cold-rolled (50±90% reduction) ultra low carbon (ULC) steel using X-ray texture measurements and orientation imaging microscopy (OIM). During deformation, g-®bre (ND//h111i) increased between 0 and 50% reduction but

Development of ferritic stainless steel

Development of ferritic stainless steel sheets with excellent deep drawability by {1 1 1} recrystallization texture control

✍ Yoshihiro Yazawa; Yoshihiro Ozaki; Yasushi Kato; Osamu Furukimi 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 265 KB

In order to develop ferritic stainless steel sheets with high formability, control of the {1 1 1} recrystallization texture has been investigated with the aim of increasing the Lankford values. Based on the results, development of ferrite stainless steel with deep drawability which has an r-value of

Modelling texture development during equ

Modelling texture development during equal channel angular extrusion of aluminium

✍ A Gholinia; P Bate; P.B Prangnell 📂 Article 📅 2002 🏛 Elsevier Science 🌐 English ⚖ 713 KB

The deformation textures that develop in aluminium during ECAE (without rotation of the billet) have been investigated experimentally and modelled using the FC-Taylor approach, for two different die angles (90 and 120°), by using actual deformation histories measured from scribed marker grids. This