✦ LIBER ✦

Modeling of postyield behavior of glassy polymers

✍ Scribed by E. Kontou

Publisher: John Wiley and Sons
Year: 1996
Tongue: English
Weight: 393 KB
Volume: 61
Category: Article
ISSN: 0021-8995
DOI: 10.1002/(sici)1097-4628(19960919)61:12<2191::aid-app19>3.0.co;2-a

No coin nor oath required. For personal study only.

✦ Synopsis

The yield stress of amorphous glassy polymers depends strongly on the strain rate, temperature, and hydrostatic pressure. On the other hand, the yield criteria, valid for metals, do not describe this behavior. Therefore, the yield phenomenon of the polymeric glassy state must be mainly a nonlinear viscoelastic effect. In this work, an analysis based on the concept of activation volume tensor, described elsewhere, and using fundamental equations of nonlinear viscoelasticity, is presented. It has been confirmed that this consideration leads to a satisfactory description of the postyield behavior, including strain softening and strain hardening. The strain rate and temperature effect have also been modeled for various rates and temperatures.

📜 SIMILAR VOLUMES

Simulation of viscoelastic behavior of g

Simulation of viscoelastic behavior of glassy polymers

✍ Masoud Frounchi 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 294 KB 👁 2 views

The frequency master curves of thermoset and thermoplastic glassy polymers were determined by dynamic mechanical analysis, and the results were simulated by sinusoidal response of the standard viscoelastic model. The elastic and viscous elements of the model were determined and correlated with struc

Postyield behavior of subchondral trabec

Postyield behavior of subchondral trabecular bone

✍ Hayes, W. C. ;Carter, D. R. 📂 Article 📅 1976 🏛 John Wiley and Sons 🌐 English ⚖ 380 KB

## Abstract Cylindrical specimens of bovine subchondral trabecular bone were tested to uniaxial compressive strain levels of 75% to study energy absorption during pore collapse. Stress–strain curves were characterized by macroscopic yield at about 8% strain followed by a significant horizontal pore

Stress—strain behavior of rubber-reinfor

Stress—strain behavior of rubber-reinforced glassy polymers

✍ Seymour Newman; Stephen Strella 📂 Article 📅 1965 🏛 John Wiley and Sons 🌐 English ⚖ 732 KB

Finite difference modeling of the gas tr

Finite difference modeling of the gas transport process in glassy polymers

✍ J. B. Brolly; D. I. Bower; I. M. Ward 📂 Article 📅 1996 🏛 John Wiley and Sons 🌐 English ⚖ 632 KB

Finite difference modeling has been used to predict the results of gas transport experiments for a concentration-dependent diffusion coefficient. Experiments on the transport of C 0 2 in poly(ethy1ene terephthalate) and poly(ethy1ene naphthalate) had previously shown a difference between the effecti

Sorption of gases in glassy polymers: A

Sorption of gases in glassy polymers: A probabilistic model

✍ Eric Favre; Pierre Schaetzel; Quang Trong Nguyen; Jean Néel 📂 Article 📅 1994 🏛 John Wiley and Sons 🌐 English ⚖ 409 KB

## Abstract The description of the sorption mechanism of gases in glassy in glassy polymers is of importance for membrane‐based gas separation processes as well as for packaging applications. Dual mode theory, postulating a Henry and Langmuir process to occur and leading to an equation with three a

Dissolution of rubbery and glassy polyme

Dissolution of rubbery and glassy polymers

✍ J. S. Vrentas; C. M. Vrentas 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 123 KB

A mathematical model is formulated for solvent dissolution of rubbery and glassy polymers. An exact solution to the problem is derived for the constant diffusivity case, and a weighted residual solution is developed for the case of a concentrationdependent diffusion coefficient. The solution is used