✦ LIBER ✦

Modeling of poly(amic acid) and polyimide reactors

✍ Scribed by S. K. Verma; Santosh K. Gupta

Publisher: John Wiley and Sons
Year: 1997
Tongue: English
Weight: 362 KB
Volume: 66
Category: Article
ISSN: 0021-8995
DOI: 10.1002/(sici)1097-4628(19971219)66:11<2059::aid-app2>3.0.co;2-g

No coin nor oath required. For personal study only.

✦ Synopsis

A comprehensive kinetic model is presented which accounts for the major and side reactions present in poly(amic acid) and polyimide reactors. The mathematical framework is quite general and permits incorporation of heat-and mass-transfer aspects typically encountered in large-scale reactors. A few rate constants were curvefitted using some (limited) experimental data available in the open literature. Using these (and the other rate constants from the literature), some interesting phenomena have been predicted at higher temperatures. Detailed experimental data are required to evaluated all the rate constants with precision.

📜 SIMILAR VOLUMES

13C n.m.r. analysis of fluorinated polyi

13C n.m.r. analysis of fluorinated polyimides and poly (amic acid)s

✍ Shinji Ando; Tohru Matsuura; Shiro Nishi 📂 Article 📅 1992 🏛 Elsevier Science 🌐 English ⚖ 519 KB

Synthesis and characterization of poly(a

Synthesis and characterization of poly(acrylate amic acid) and its application as negative-tone photosensitive polyimides

✍ Chang-Hong Ho; Sheng Chang; Yu-Der Lee 📂 Article 📅 2009 🏛 John Wiley and Sons 🌐 English ⚖ 281 KB 👁 2 views

Two-step thermal conversion from poly(am

Two-step thermal conversion from poly(amic acid) to polybenzoxazole via polyimide: Their thermal and mechanical properties

✍ Jin-Hae Chang; Kwang Min Park; Soo-Min Lee; Jae Buem Oh 📂 Article 📅 2000 🏛 John Wiley and Sons 🌐 English ⚖ 179 KB 👁 1 views

Modeling of poly(phenylene oxide) reacto

Modeling of poly(phenylene oxide) reactors

✍ M. Misra; Santosh K. Gupta 📂 Article 📅 1995 🏛 John Wiley and Sons 🌐 English ⚖ 917 KB

Elastic modulus of the crystalline regio

Elastic modulus of the crystalline regions of polyimide derived from poly(amic acid)–biphtalic dianhydride and p-phenylene diamine

✍ Takashi Nishino; Norihiko Miki; Yoshiaki Mitsuoka; Katsuhiko Nakamae; Takayuki S 📂 Article 📅 1999 🏛 John Wiley and Sons 🌐 English ⚖ 203 KB 👁 2 views

The elastic modulus E l of the crystalline regions in the direction parallel to the chain axis was measured by X-ray diffraction for polyimide derived from polyamic acid (biphthalic dianhydride and p-phenylene diamine). These specimens were cured by two different routes: curing at 200 °C, and at 400

Polyimide Orientation Layers Prepared fr

Polyimide Orientation Layers Prepared from Lyotropic Aromatic Poly(Amic Ethyl Ester)s

✍ C. Neuber; R. Giesa; H.-W. Schmidt 📂 Article 📅 2003 🏛 John Wiley and Sons 🌐 English ⚖ 257 KB 👁 1 views