๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Modeling of oxygen chemisorption kinetics on coal char

โœ Scribed by M.Rashid Khan; C.Elaine Everitt; Alain P. Lui


Publisher
Elsevier Science
Year
1990
Tongue
English
Weight
646 KB
Volume
80
Category
Article
ISSN
0010-2180

No coin nor oath required. For personal study only.


๐Ÿ“œ SIMILAR VOLUMES


Chemisorption of oxygen on cellulose cha
โœ A.G.W. Bradbury; F. Shafizadeh ๐Ÿ“‚ Article ๐Ÿ“… 1980 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 624 KB

Investigation of a series of chars prepared by rapid pyrolysis of cellulose in the temperature range of 400~800ยฐC has shown that they have a high chemisorptive affinity for oxygen. Maximum chemisorption occured on chars prepared at a HTT of 550ยฐC. The Elovich equation was used to describe the kineti

Influence of inorganic additives on oxyg
โœ William F. DeGroot; Fred Shafizadeh ๐Ÿ“‚ Article ๐Ÿ“… 1983 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 865 KB

Chemisorption of oxygen on cellulosic chars is the initial step leading to gasification and is a significant factor in controlling chemical reactivity and heat release in smoldering and glowing combustion of cellulose. Oxygen chemisorption kinetics have been determined for chars (HTT SSO'C) prepared

The adsorption of oxygen on brown coal c
โœ D.J. Allardice ๐Ÿ“‚ Article ๐Ÿ“… 1966 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 763 KB

The adsorption of oxygen on degassed brown coal char has been investigated gravimetrically in the temperature range 25"-200ยฐC and at pressures up to 1 atm. The adsorption occurs by two separate processes, one reversible and the other irreversible. Methods have been devised to investigate these proce

228. Kinetics of oxygen chemisorption on
โœ P.C. Pinoli; J.G. Moncur; D.G. Mckinstry ๐Ÿ“‚ Article ๐Ÿ“… 1982 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 130 KB

Dynamic mechanical measurements and short beam shear tests have been used to characterize an Epon 828/MPDA epoxy resin and its composites with types A and HM carbon fibers. T, of the unfilled resin is sensitive to both epoxy stoichiometry and curing schedule. Composite properties depend on fiber typ