Modeling of a substrate thermomechanical behavior during plasma spraying

✍ Scribed by F. Hugot; J. Patru; P. Fauchais; L. Bianchi

• Book ID: 104023533
• Publisher: Elsevier Science
• Year: 2007
• Tongue: English
• Weight: 927 KB
• Volume: 190
• Category: Article
• ISSN: 0924-0136
• DOI: 10.1016/j.jmatprotec.2007.02.023

✦ Synopsis

Plasma coating performances and lifetimes may be ruined during service conditions because of uncontrolled residual stress development within the coating. This study presents the results of a CAST3M ® thermomechanical numerical model which purpose is to simulate the different residual stresses development within the duplex coating-substrate during the coating built-up and its comparison with the experimental results. To achieve the thermal spray process understanding all the thermal fluxes transferred to a metallic beam and surrounding temperatures were measured so as to provide the CAST3M ® model with precise boundary conditions, corresponding to a specific geometry. The residual stresses were experimentally determined by the in situ curvature measurement and, afterwards, by the hole drilling method. The plasma torch stand-off distance, the relative torch/substrate velocity and the substrate material were considered as the parameters of this study. The main results concern the substrate temperature and deflection during the preheating stage, the thermal energy transferred by the molten splats to the substrate together with the quenching stress and the development of thermal stress during the final cooling.