Modeling micro-inertia in heterogeneous materials under dynamic loading
โ Scribed by Ze-Ping Wang; C.T. Sun
- Publisher
- Elsevier Science
- Year
- 2002
- Tongue
- English
- Weight
- 188 KB
- Volume
- 36
- Category
- Article
- ISSN
- 0165-2125
No coin nor oath required. For personal study only.
โฆ Synopsis
A continuum model including micro-inertia for heterogeneous materials under dynamic loading is proposed using a micro-mechanics method. The macro strain and stress are defined as the volume averages of the strain and stress fields in the representative volume element (RVE). The macro equations of motion are derived by using Hamilton's principle together with the strain energy density and kinetic energy density involving the micro-inertia terms. The new macro equations of motion are used to study harmonic and transient wave propagation in layered media. Using a simple linear displacement field for the RVE, the dispersion curves obtained from the present model agree with the exact solutions very well for a range of wavelengths. The present model is also applied to analyze the transient response of layered media subjected to a triangular pulse loading. Comparison is made between the results of the present model and a finite element analysis.
๐ SIMILAR VOLUMES
This paper presents a damage-viscoplastic consistency model for numerical simulation of brittle fracture in heterogeneous rocks. The model is based on a combination of the recent viscoplastic consistency model by Wang and the isotropic damage concept with separate damage variables in tension and com
The failure of materials due to slow crack growth, under dynamic loading conditions, is analyzed in terms of crack velocity, stress intensity relationships. It is shown that this type of analysis can fully describe the failure characteristics for both constant strain-rate and constant stress-rate lo
Mixed-mode dynamic crack growth behavior in functionally graded materials (FGMs) under thermo-mechanical loading is studied. Asymptotic analysis in conjunction with displacement potentials has been used to develop thermo-mechanical stress fields for a mixed mode propagating crack in a FGM. The shear