𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Modeling and Control of a Naphtha Thermal Cracking Pilot Plant

✍ Scribed by Masoumi, Miresmaeil; Shahrokhi, Mohammad; Sadrameli, Mojtaba; Towfighi, Jafar

Book ID
118167461
Publisher
American Chemical Society
Year
2006
Tongue
English
Weight
470 KB
Volume
45
Category
Article
ISSN
0888-5885

No coin nor oath required. For personal study only.

πŸ“œ SIMILAR VOLUMES

Systematics and modeling representations
Systematics and modeling representations of naphtha thermal cracking for olefin production
✍ S.M. Sadrameli; A.E.S. Green πŸ“‚ Article πŸ“… 2005 πŸ› Elsevier Science 🌐 English βš– 499 KB

Thermal cracking or steam pyrolysis of hydrocarbons could convert them into valuable raw materials, which can be used in the petrochemical industry for polymer production. The reaction mechanisms of naphtha cracking are generally accepted as free-radical chain reactions. Unfortunately, the absence o

Anti-coking property of the SiO2/S coati
Anti-coking property of the SiO2/S coating during light naphtha steam cracking in a pilot plant setup
✍ Jianxin Zhou; Zhiyuan Wang; Xiaojian Luan; Hong Xu πŸ“‚ Article πŸ“… 2011 πŸ› Elsevier Science 🌐 English βš– 554 KB

On the basis of development in the laboratory, the SiO 2 /S coating was prepared on the internal surface of HK40 alloy tube in a pilot plant setup. The coating sampled on the outlet of furnace tube was characterized by scanning electron microscope (SEM). The anti-coking property of the SiO 2 /S coat

Thermal cracking of propane and propane-
Thermal cracking of propane and propane-propylene mixtures: Pilot plant versus industrial data
✍ P. S. Van Damme; S. Narayanan; G. F. Froment πŸ“‚ Article πŸ“… 1975 πŸ› American Institute of Chemical Engineers 🌐 English βš– 838 KB

## Abstract The product distribution and kinetics of the thermal cracking of propane and propane‐propylene mixtures were investigated for a temperature range of 700Β° to 850Β°C, exit total pressures from 1.2 to 2 atm. absolute, and steam dilutions of 0.4 and 1.0. The reaction kinetics were determined

Fuzzy modeling of a thermal solar plant
Fuzzy modeling of a thermal solar plant
✍ M. J. LΓ³pez-BaldΓ‘n; A. GarcΓ­a-Cerezo; J. M. Cejudo LΓ³pez; A. Romero Gallego πŸ“‚ Article πŸ“… 2002 πŸ› John Wiley and Sons 🌐 English βš– 134 KB

Fuzzy modeling has been widely applied as a powerful methodology for the identification of nonlinear systems from process measurements. In particular, the design of black-box approaches based on fuzzy models has been recognized as an alternative to mathematical methods. This article deals with the a