Model suggested for an important part of the hydro-mechanical behaviour of a water unsaturated bentonite

✍ Scribed by Ann Dueck; Lennart Börgesson

• Book ID: 104017719
• Publisher: Elsevier Science
• Year: 2007
• Tongue: English
• Weight: 514 KB
• Volume: 92
• Category: Article
• ISSN: 0013-7952
• DOI: 10.1016/j.enggeo.2007.04.004

✦ Synopsis

The hydro-mechanical behaviour of a clay-based buffer material for nuclear waste disposal has been investigated in a laboratory program. In this program, the main focus was on the influence of confinement on water uptake and swelling pressure during suction decrease. The laboratory program and some of the results are presented by Dueck [Dueck, A., 2006. Laboratory results from hydro-mechanical tests on a water unsaturated bentonite. submitted for publication.].

The results from the laboratory tests were used to find a relationship between water content, void ratio, swelling pressure and suction. Two equations for swelling pressure represent the outline of the model.

In the first equation, the swelling pressure developed during water uptake is normalised by a pressure corresponding to the swelling pressure at saturation. This is done in order to be independent of void ratio. A relationship between the normalised swelling pressure and the degree of saturation is suggested.

The second equation describes a relationship between the swelling pressure, the water content and the actual suction (or relative humidity). The equation is based on a thermodynamic relationship and includes the retention curve (i.e. water content vs. suction under free swelling conditions).

The model can be used for a state where two of the four variables; water content, void ratio, swelling pressure and suction are known and can thus be useful to evaluate field measurements and model late stages of the wetting process. An example of an application is given. The equations are mainly based on results from tests with increasing degrees of saturation under constant void ratio but are also suggested for use with increasing void ratio.