๐”– Bobbio Scriptorium
โœฆ   LIBER   โœฆ

Mode of failure in structural adhesive bonds

โœ Scribed by N. J. Delollis; O. Montoya

Book ID
101581202
Publisher
John Wiley and Sons
Year
1967
Tongue
English
Weight
360 KB
Volume
11
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

๐Ÿ“œ SIMILAR VOLUMES

The failure mode of adhesively bonded al
The failure mode of adhesively bonded aluminium following aqueous exposure
โœ J. F. Watts; R. A. Blunden; T. J. Hall ๐Ÿ“‚ Article ๐Ÿ“… 1990 ๐Ÿ› John Wiley and Sons ๐ŸŒ English โš– 942 KB

## Abstract Adhesively bonded aluminium sheets pretreated by phosphoric acid anodizing (PAA) or chromic acid anodizing (CAA) were fabricated into 180ยฐ Tโ€peel test pieces. These were then exposed to cycles of aqueous exposure at elevated temperature, followed by a drying procedure at ambient or elev

Competing failure mechanisms in mixed-mo
Competing failure mechanisms in mixed-mode fracture of an adhesively bonded polymer-matrix composite
โœ S. Li; M.D. Thouless; A.M. Waas; J.A. Schroeder; P.D. Zavattieri ๐Ÿ“‚ Article ๐Ÿ“… 2006 ๐Ÿ› Elsevier Science ๐ŸŒ English โš– 513 KB

In this paper, the use of cohesive-zone models to analyze crack-path selection in adhesive joints made from a polymer-matrix composite is demonstrated. Cohesive-zone parameters for the adhesive and composite obtained in a previous work were used without any modifications to make the predictions pres