This paper presents a nonholonomic path planning method, aiming at taking into considerations of curvature constraint, length minimization, and computational demand, for car-like mobile robot based on cubic spirals. The generated path is made up of at most five segments: at most two maximal-curvatur
Mobile robot path planning and tracking using simulated annealing and fuzzy logic control
✍ Scribed by Horacio Martı́nez-Alfaro; Simón Gómez-Garcı́a
- Publisher
- Elsevier Science
- Year
- 1998
- Tongue
- English
- Weight
- 348 KB
- Volume
- 15
- Category
- Article
- ISSN
- 0957-4174
No coin nor oath required. For personal study only.
✦ Synopsis
This article describes the development and implementation of an automatic controller for path planning and navigation of an autonomous mobile robot using simulated annealing and fuzzy logic. The simulated annealing algorithm was used to obtain a collision-free optimal trajectory among fixed polygonal obstacles. C-space was used to represent the working space and B-spline curves were used to represent the trajectories. The trajectory tracking was performed with a fuzzy logic algorithm. A detailed explanation of the algorithm is given. The objectives of the control algorithm were to track the planned trajectory and to avoid collision with moving obstacles. Simulation and implementation results are shown. A Nomadic 200 mobile robot was used to perform the experiments.
📜 SIMILAR VOLUMES
Ball and plate system is the extension of traditional ball and beam system. In this paper, a trajectory planning and tracking problem of ball and plate system is put forward to proof-test diverse control schemes. Firstly, we derive the mathematical model of the ball and plate system in detail. Then
In Korea, research projects on year-round leaf vegetable production systems are in progress, most of them focused on environmental control. Therefore, automation technologies for harvesting, transporting and grading are in great demand. A robot system was developed for harvesting lettuce plants, com
Most industrial robots today are placed on fixed locations. A few have limited mobility on tracks mounted on the factory floor [I]. There are also mobile carts that transport workpieces, but these carts can move only in a structured environment, i.e., by following painted lines. Robot mobility, howe