𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Mixed percolating network and mechanical properties of polypropylene/talc composites

✍ Scribed by D. Frihi; K. Masenelli-Varlot; G. Vigier; H. Satha


Publisher
John Wiley and Sons
Year
2009
Tongue
English
Weight
378 KB
Volume
114
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.


πŸ“œ SIMILAR VOLUMES


Effect of silane-grafted polypropylene o
✍ Wulin Qiu; Kancheng Mai; Hanmin Zeng πŸ“‚ Article πŸ“… 2000 πŸ› John Wiley and Sons 🌐 English βš– 98 KB πŸ‘ 2 views

Talc-filled polypropylene (PP) composites coupled with silane-grafted polypropylene (PP-g-Si) were prepared. Effect of PP-g-Si on the mechanical properties, crystallization, and melting behavior of PP composites was investigated. Compared with the uncoupled composites, the mechanical properties of T

Polypropylene–wood fiber composites: Eff
✍ Fernanda M.B. Coutinho; Thais H.S. Costa; Daisy L. Carvalho πŸ“‚ Article πŸ“… 1997 πŸ› John Wiley and Sons 🌐 English βš– 246 KB πŸ‘ 2 views

Polypropylene/wood fiber composites were prepared at three different temperatures: 170ЊC, 180ЊC, and 190ЊC. The surface of wood fibers was modified through the use of silane coupling agents and/or coating with polypropylene or maleated polypropylene. The fiber coating was performed by propylene poly

Thermal and mechanical properties of pol
✍ M. G. Salemane; A. S. Luyt πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 159 KB πŸ‘ 2 views

## Abstract The preparation and characterization of modified and unmodified polypropylene (PP)–wood powder (WP) composites were done under fixed processing conditions. Different techniques were used to study the effect of both WP size and content, as well as compatibilizer content, on the propertie

Mechanical and thermal properties of pol
✍ B. Ramaraj πŸ“‚ Article πŸ“… 2006 πŸ› John Wiley and Sons 🌐 English βš– 190 KB πŸ‘ 2 views

## Abstract To determine the possibility of using sugarcane bagasse (SCB) waste as reinforcing filler in the thermoplastic polymer matrix, SCB‐reinforced polypropylene (PP) composites were prepared. The PP and SCB composites were prepared by the extrusion of PP resin with 5, 10, 15, and 20 wt % of