𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Miscibility of poly(neopentyl glycol adipate) with chlorinated polypropylene and with vinyl chloride/vinyl acetate copolymers

✍ Scribed by S. H. Goh; T. T. Nguyen; K. S. Siow

Publisher
John Wiley and Sons
Year
1984
Tongue
English
Weight
140 KB
Volume
29
Category
Article
ISSN
0021-8995

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Mechanical properties of blends of PAMAM
Mechanical properties of blends of PAMAM dendrimers with poly(vinyl chloride) and poly(vinyl acetate)
✍ Carlos M. Nunez; Anthony L. Andrady; Rong K. Guo; Jesse N. Baskir; David R. Morg 📂 Article 📅 1998 🏛 John Wiley and Sons 🌐 English ⚖ 147 KB 👁 2 views

Hybrid blends of poly(amidoamine) PAMAM dendrimers with two linear high polymers, poly(vinyl chloride), PVC, and poly(vinyl acetate), PVAc, are reported. The interaction between the blend components was studied using dynamic mechanical analysis, xenon nuclear magnetic resonance (NMR) spectroscopy, a

Cyclic ureas as solvents for esterificat
Cyclic ureas as solvents for esterification of poly(vinyl alcohol) and vinyl acetate-vinyl alcohol copolymers with acid chlorides
✍ M. D. Fernández; M. J. Fernández 📂 Article 📅 2007 🏛 John Wiley and Sons 🌐 English ⚖ 181 KB 👁 2 views

## Abstract Poly(vinyl alcohol) (PVAL) and vinyl acetate‐vinyl alcohol copolymers (VAVAL) were esterified with 3,5‐dinitrobenzoyl chloride using the cycled urea __N__,__N__′‐dimethylpropyleneurea (1,3‐dimethyl‐3,4,5,6‐tetrahydro‐2(1H)‐pyrimidinone) (DMPU) as the solvent. Vinyl alcohol‐vinyl‐3,5‐din

Blends of poly(vinyl chloride) with acry
Blends of poly(vinyl chloride) with acrylonitrile-chlorinated polyethylene-styrene copolymer. II. Mechanical properties
✍ Zhikai Zhong; Sixun Zheng; Kejia Yang; Qipeng Guo 📂 Article 📅 1997 🏛 John Wiley and Sons 🌐 English ⚖ 220 KB 👁 2 views

Blends of poly(vinyl chloride) (PVC) and acrylonitrile-chlorinated polyethylene-styrene (ACS) graft copolymer were prepared by melt blending. Mechanical properties were studied by the use of dynamic mechanical analysis (DMA), impact tests, tensile tests, and scanning electron microscopy (SEM). The D

Modification of chlorinated poly(vinyl c
Modification of chlorinated poly(vinyl chloride) by blending with epoxidized polybutadiene
✍ Dionissia D. Sotiropoulou; Kostas G. Gravalos; Nikos K. Kalfoglou 📂 Article 📅 1992 🏛 John Wiley and Sons 🌐 English ⚖ 427 KB 👁 1 views

The compatibility of epoxidized poly (cis-1,4-butadiene) (EPB) with chlorinated polyvinylchloride ( CPVC ) was investigated. Blends studied covered the complete composition range using EPB at two degrees of epoxidation: 20 and 43 mol % oxirane units. Tensile properties of EPB(63)/CPVC were also stud