Minimizing the surface effect of PDMS–glass microchip on polymerase chain reaction by dynamic polymer passivation
✍ Scribed by Yong-Mei Xia; Zhi-Shan Hua; Onnop Srivannavit; Ayse Bilge Ozel; Erdogan Gulari
- Publisher
- Wiley (John Wiley & Sons)
- Year
- 2006
- Tongue
- English
- Weight
- 265 KB
- Volume
- 82
- Category
- Article
- ISSN
- 0268-2575
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Polydimethyl siloxane (PDMS)–glass microchip has a very strong surface effect on polymerase chain reaction (PCR), leading to a very poor PCR yield. In the work reported here, practical dynamic passivation of surfaces of PDMS–glass microchip using polyethylene glycol (PEG) or polyvinylpyrrolidone (PVP) was achieved using a conventional thermocycler. The passivation procedure was cost‐effective and easy to conduct. The effects of polymer molecular weight and polymer concentration on tube PCR efficiency were investigated primarily to prescreen out suitable polymers and polymer concentrations in the PCR mixture. The result from tube PCR indicated that both PEG and PVP could affect the performance of Taq polymerase. A final concentration of 0.025% (w/v) or 0.4% (w/v) polymer in the PCR mixture can enhance the tube PCR, while 1% (w/v) polymer was found to inhibit the reaction. PEG was more effective in tube PCR, although PVP performed better in chip PCR. Instead of employing the polymer directly in the PCR mixture, i.e. the conventional in situ passivation approach, another approach of dynamic passivation by pre‐injecting polymers into the microchip achieved better performance. The efficiency of pre‐passivation was found to follow the order: PVP10000>PVP55000, PEG8000> PEG10000>PEG400. After pre‐passivation with PVP10000, PVP55000 and PEG8000, the PCR efficiency can recover to 93%, 86% and 83%, respectively, of that obtained from tube PCR. Copyright © 2006 Society of Chemical Industry