✦ LIBER ✦

Minimising the peak load in a shared storage system based on the duration-of-stay of unit loads

✍ Scribed by Chen, Lu; Riopel, Diane; Langevin, Andre

Book ID: 121216935
Publisher: Inderscience Publishers
Year: 2009
Tongue: English
Weight: 163 KB
Volume: 1
Category: Article
ISSN: 1756-6517
DOI: 10.1504/IJSTL.2009.021974

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Shared Storage Policies Based on the Dur

Shared Storage Policies Based on the Duration Stay of Unit Loads

✍ Marc Goetschalckx and H. Donald Ratliff 📂 Article 📅 1990 🏛 INFORMS 🌐 English ⚖ 422 KB

Shared Storage Policies Based on the Dur

Shared Storage Policies Based on the Duration Stay of Unit Loads

✍ Goetschalckx, Marc; Ratliff, H. Donald 📂 Article 📅 1990 🏛 INFORMS 🌐 English ⚖ 893 KB

The comparative effectiveness of serving

The comparative effectiveness of serving peak loads in the variants of providing nuclear power plants with a base load

✍ V. M. Batenin, R. Z. Aminov, A. F. Shkret, M. V. Garievskii 📂 Article 📅 2012 🏛 SP MAIK Nauka/Interperiodica 🌐 English ⚖ 236 KB

Influence of loading duration on the sta

Influence of loading duration on the start-up friction in synovial joints: measurements using a robotic system

✍ K. Mabuchi; M. Ujihira; T. Sasada 📂 Article 📅 1998 🏛 Elsevier Science 🌐 English ⚖ 317 KB

Comments on "The relative effectiveness

Comments on "The relative effectiveness of assigned and shared storage in a switching system"

✍ Snyder, R.; Saber, N.; Young, H. 📂 Article 📅 1967 🏛 Institute of Electrical and Electronics Engineers 🌐 English ⚖ 141 KB

On the thermal Cyclic Loading Behaviour

On the thermal Cyclic Loading Behaviour of a directional eutectic superalloy based on the CoCrC system

✍ Dr. U. W. Hildebrandt; A. R. Nicoll 📂 Article 📅 1981 🏛 John Wiley and Sons 🌐 English ⚖ 318 KB

## Abstract Various modifications of the eutectic, directionally solidified superalloy 73 C were investigated with respect to creep fatigue effects. This was carried out using a thermal cycling apparatus where a mechanical uniaxial load could be applied. A high volume fraction of carbides had an im