## Abstract A multiband internal multiple‐input multiple‐output (MIMO) antenna for USB dongle applications is proposed. Two types of antenna element are used to construct a MIMO antenna system. The resonance frequencies of the MIMO antenna are controlled by the lengths of the two asymmetric arms or
MIMO antenna using a decoupling network for 4G USB dongle application
✍ Scribed by Minseok Han; Jaehoon Choi
- Publisher
- John Wiley and Sons
- Year
- 2010
- Tongue
- English
- Weight
- 792 KB
- Volume
- 52
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
A compact MIMO antenna using a decoupling network for 4G USB dongle application is proposed. The proposed MIMO antenna consists of two parallel folded monopole antennas with the length of 100 mm and a decoupling network. To improve the isolation characteristic at the LTE band 13, a decoupling network was added between the two antennas placed close to each other. The decoupling network is simple and compact and consists of two sections of transmission line, a shunt reactive component and quarter‐wavelength jointed shorting structure. The proposed MIMO antenna has the isolation less than −15 dB at the LTE band 13 and the ECC is lower than 0.4 over the whole LTE band. © 2010 Wiley Periodicals, Inc. Microwave Opt Technol Lett 52:2551–2554, 2010; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.25551
📜 SIMILAR VOLUMES
## Abstract This article presents a compact internal ultra‐wideband antenna for wireless universal serial bus dongle application. The proposed antenna has a simple configuration and is easy to implement by bending a simple metal plate. To widen the impedance bandwidth, the proposed antenna has a ve
## Abstract A dual‐band multiple‐input multiple‐output (MIMO) antenna using polarization diversity is proposed for a 4G mobile handset application.The proposed MIMO antenna consists of two printed dual‐band PIFAs with a slotted strip. Input port 1 of the first PIFA is orthogonally disposed with res
## Abstract Proposed within this document is a compact internal antenna intended for multiband operation. The antenna consists of two‐pronged elements with two stubs and has a comparatively small volume of 16 mm × 5 mm × 1 mm. The measured return loss of the designed antennas was >10 dB for wireles