𝔖 Bobbio Scriptorium
✦   LIBER   ✦

Microwave transmission loss in multi-walled nanotubes

✍ Scribed by Jun, S. C. ;Cha, S. N. ;Lee, S. ;Jang, J. E. ;Jin, Y. W. ;Kim, H. J. ;Hone, J. ;Kim, J. M.


Publisher
John Wiley and Sons
Year
2008
Tongue
English
Weight
600 KB
Volume
205
Category
Article
ISSN
0031-8965

No coin nor oath required. For personal study only.

✦ Synopsis


Abstract

Experimental results for microwave transmission losses of individual multi‐walled carbon nanotubes (MWNTs) are presented. Samples with MWNTs, as well as samples with‐out MWNTs, were fabricated with two types of electrode materials (Nb vs. Cr/Au) and configurations to compare AC transmissions loss as passive devices at room temperature. In the MWNT‐Nb samples, the transmitted current is higher and attenuation is lower than the MWNT‐Cr/Au samples. However, the transmission loss increases much faster in the Nb samples than Cr/Au samples with increasing frequency. Overall, their S ‐parameter measurements from 0.5 GHz to 110 GHz support frequency‐dependent microwave dissipation of the MWNTs and the metal‐electrode contact. (© 2008 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)


📜 SIMILAR VOLUMES


CESR in multi walled carbon nanotubes
✍ Satoshi Ishii; Nobuyuki Aoki; Koichirou Miyamoto; Nobuko Oguri; Kazunaga Horiuch 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 70 KB

We have clariÿed carrier spin relaxation process in multi walled carbon nanotubes (MWCNT) fabricated by DC arc discharge and studied the fundamental transport mechanism in MWCNT by means of electron spin resonance (ESR) in order to discuss on the transport properties in the MWCNT. The g-value and th

Electromagnetic and microwave absorbing
✍ Zhuangjun Fan; Guohua Luo; Zengfu Zhang; Li Zhou; Fei Wei 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 477 KB

The preparation and characterization of CNTs/polymer (PET, PP, PE and varnish) composites were studied for microwave absorption applications in the range of 2–18GHz. The results indicated the position of reflectivity peak moves to a lower frequency and the loss factors of composites increase with in