## Abstract This paper describes optimal coplanar waveguide (CPW) 2^nd^ harmonic notch filters that utilize metal‐insulator‐metal (MIM) capacitors at each discontinuity, eliminating the need for conventional air‐bridges and significantly reducing the filter footprint. The circuits were fabricated o
Microwave notch filters using embedded stubs
✍ Scribed by Ching-Wen Hsue; Raj Mittra; Yi-Hsien Tsai; Chih-Chen Hsu
- Publisher
- John Wiley and Sons
- Year
- 2009
- Tongue
- English
- Weight
- 330 KB
- Volume
- 51
- Category
- Article
- ISSN
- 0895-2477
No coin nor oath required. For personal study only.
✦ Synopsis
Abstract
Embedded stubs are employed to implement microwave notch filters with narrow bandwidth and sharp rejection rate. The embedded stub exhibits higher equivalent characteristic impedance and takes less area than the conventional shunt stub. An equal‐length, two‐section stub offers multiple stop‐bands which are fundamentally different from those obtained in conventional quarter‐wavelength stub. Experimental results are presented to show the validity of the design method. © 2009 Wiley Periodicals, Inc. Microwave Opt Technol Lett 51: 2839–2842, 2009; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.24760
📜 SIMILAR VOLUMES
## Abstract An ultra‐wideband (UWB) bandpass filter with good out‐of‐band rejection is presented in this work. As a starting part of designing UWB filter, a shunt short‐circuited stub is introduced at the center of a half‐wavelength resonator and it can generate two transmission zeros near the lowe
## Abstract A new method for the design of a bandstop filter is presented. The two‐section open stub is employed to emulate a notch filter in the discrete‐time domain. A cascade connection of two‐section open stubs with proper frequency scaling serves to represent a bandstop filter of wider stopban
## Abstract A discrete‐time, second‐order notch filter is employed to study the microwave bandstop filter. By equating the system function of the second‐order notch filter to the transfer function of a serial line shunted with an equal‐length, two‐section open stub, simple and explicit expressions
## Abstract In this article, a cascaded bandstop filter using quarter‐wavelength open‐circuited stub structure is employed to suppress the spurious passband at the second harmonic of the bandpass filter. The center frequency of the fabricated bandpass filter is at 0.9 GHz and the fractional bandwid
## Abstract In this paper, a compact three‐poles hairpin line wideband bandpass filter with several embedded open stubs to improve the stopband is designed and implemented on print circuit board substrate. This filter at center frequency f~0~ of 4.25 GHz has presented almost very good measured char