✦ LIBER ✦

Microstrucure and strengthening of Al–Li–Cu–Mg alloys and MMCs: II. Modelling of yield strength

✍ Scribed by M.J. Starink; P. Wang; I. Sinclair; P.J. Gregson

Publisher: Elsevier Science
Year: 1999
Tongue: English
Weight: 248 KB
Volume: 47
Category: Article
ISSN: 1359-6454
DOI: 10.1016/s1359-6454(99)00228-1

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstrucure and strengthening of Al–Li

Microstrucure and strengthening of Al–Li–Cu–Mg alloys and MMCs: I. Analysis and Modelling of Microstructural changes

✍ M.J Starink; P Wang; I Sinclair; P.J Gregson 📂 Article 📅 1999 🏛 Elsevier Science 🌐 English ⚖ 342 KB

A model for the yield strength of overag

A model for the yield strength of overaged Al–Zn–Mg–Cu alloys

✍ M.J. Starink; S.C. Wang 📂 Article 📅 2003 🏛 Elsevier Science 🌐 English ⚖ 675 KB

On the mechanical properties and stress

On the mechanical properties and stress corrosion resistance of ternary AlCuLi and Quaternary AlLiCuMg alloys

✍ R.C. Dorward 📂 Article 📅 1986 🏛 Elsevier Science ⚖ 777 KB

Strain localization behaviour of Al-Cu a

Strain localization behaviour of Al-Cu and Al-Li-Cu-Mg-Zr alloys due to cathodic charging

✍ A. Bandyopadhyay; U. Ramamurthy; E. S. Dwarakadasa 📂 Article 📅 1993 🏛 Springer 🌐 English ⚖ 560 KB

Local electrochemical properties of lase

Local electrochemical properties of laser beam-welded high-strength Al–Zn–Mg–Cu alloys

✍ J. Wloka; T. Hack; S. Virtanen 📂 Article 📅 2008 🏛 John Wiley and Sons 🌐 German ⚖ 628 KB

## Abstract Butt welds of two high‐strength Al–Zn–Mg–Cu alloys with different zinc contents were welded by a laser beam welding technique. Due to the high energy density of the laser beam, the microstructural changes are confined to very thin regions. Electrochemical properties of the weld heat‐aff

The effect of strain rate on flow stress

The effect of strain rate on flow stress, strength and ductility of an Al-Li-Mg alloy

✍ T. S. Srivatsan; T. Hoff; S. Sriram; Amit Prakash 📂 Article 📅 1990 🏛 Springer 🌐 English ⚖ 336 KB