Microstructure of In-Situ composites
โ Scribed by Assistant Prof. N. A. El-Mahallawy; Associate Prof. M. H. Abdel-Latif; Associate Prof. Dr.-Ing. M. A. Taha
- Publisher
- John Wiley and Sons
- Year
- 1983
- Tongue
- English
- Weight
- 802 KB
- Volume
- 14
- Category
- Article
- ISSN
- 0933-5137
No coin nor oath required. For personal study only.
โฆ Synopsis
In this paper, the results of several years of research work by the authors on the microstructure of In-Situ composites are reviewed. Alloy systems inestigated are the fibrous AI-Ni and cobalt-base superalloy Co-Cr-C, and the lamellar AI-Cu and Co-W. The effect of solidification variables and off-eutectic compositions on the microstructure of AI-Ni Co-W and AI-Cu systems was studied. The influence of heat flow direction on the microstructure of AI-Ni was examined. Post solidification isothermal annealing was performed for A1-Cu and Co-Cr-C alloy and thermal cycling regimes were imposed
๐ SIMILAR VOLUMES
In this paper, author's results of several years of research work on the mechanical properties of directionally solidified (In-Situ) composites are reviewed. Alloy systems investigated were the fibrous AI-Ni, Fe-MnS and the cobalt base superalloy Co-Cr-C and the lamellar AI-Cu and Co-W. The mechanic
It is experimentally shown that an in situ compatibilizer for the thermotropic liquid crystalline polymer blend can be generated in the extrusion process and that the compatibilizing action by the maleic anhydride-attached ethylene-propylenediene terpolymer (MA-EPDM) in the blend of nylon46 and a th