✦ LIBER ✦

Microstructure, fluidity, and mechanical properties of semi-solid processed ductile iron

✍ Scribed by M. Ramadan; N. El-Bagoury; N. Fathy; M. A. Waly; A. A. Nofal

Book ID: 106396521
Publisher: Springer
Year: 2011
Tongue: English
Weight: 675 KB
Volume: 46
Category: Article
ISSN: 0022-2461
DOI: 10.1007/s10853-011-5329-7

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Effect of semi-solid processing on solid

Effect of semi-solid processing on solidification microstructure and mechanical properties of gray cast iron

✍ Mohamed Ramadan; Mitsuharu Takita; Hiroyuki Nomura 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 925 KB

Microstructure and mechanical properties

Microstructure and mechanical properties of iron aluminides processed by reactive squeeze infiltration

✍ J Lapin 📂 Article 📅 2004 🏛 Elsevier Science 🌐 English ⚖ 437 KB

Effect of Cooling Rate on Microstructure

Effect of Cooling Rate on Microstructure and Mechanical Properties of Thin-Walled Ductile Iron Castings

✍ Marcin Górny, Edward Tyrała 📂 Article 📅 2012 🏛 Springer US 🌐 English ⚖ 892 KB

Microstructure and mechanical properties

Microstructure and mechanical properties of friction stir processed ODS ferritic steels

✍ Sanghoon Noh; Ryuta Kasada; Akihiko Kimura; Seung Hwan C. Park; Satoshi Hirano 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 681 KB

Effect of microstructure on properties o

Effect of microstructure on properties of ADI and low alloyed ductile iron

✍ A. Refaey; N. Fatahalla 📂 Article 📅 2003 🏛 Springer 🌐 English ⚖ 517 KB

Microstructure and mechanical properties

Microstructure and mechanical properties of extruded Al–Si alloy (A356) in the semi-solid state

✍ M.A. Bayoumi; M.I. Negm; A.M. El-Gohry 📂 Article 📅 2009 🏛 Elsevier Science ⚖ 1000 KB

Smooth round bars were produced from conventional non-modified cast alloy, A356, by semi-solid extrusion after isothermal holding in mushy zone. Extrusion process was carried out in an apparatus, designed and prepared for this purpose at a ram speed, 2.5 mm/s. Three forming temperatures: 560, 570 an