✦ LIBER ✦

Microstructure Characterization of Alloy 625 Deposited on Nickel Foam using Air Plasma Spraying

✍ Scribed by F. Azarmi; J. Saaedi; T. W. Coyle; J. Mostaghimi

Publisher: John Wiley and Sons
Year: 2008
Tongue: English
Weight: 422 KB
Volume: 10
Category: Article
ISSN: 1438-1656
DOI: 10.1002/adem.200700196

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Flexural properties of sandwich beams co

Flexural properties of sandwich beams consisting of air plasma sprayed alloy 625 and nickel alloy foam

✍ F. Azarmi; T. W. Coyle; J. Mostaghimi 📂 Article 📅 2009 🏛 Springer 🌐 English ⚖ 426 KB

Experiments and simulation of rapid soli

Experiments and simulation of rapid solidification of air plasma sprayed alloy 625 on stainless steel

✍ H. Liu; F. Azarmi; M. Bussmann; J. Mostaghimi; T.W. Coyle 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 847 KB

There is growing interest in the use of superalloy coatings to improve the high temperature properties of base materials. Thermal spraying methods such as air plasma spraying (APS) are convenient techniques to deposit such coatings. This work examines the rapid solidification of APS deposited alloy

Microstructural characterization of yttr

Microstructural characterization of yttria-stabilized zirconia plasma-sprayed deposits using multiple small-angle neutron scattering

✍ A.J. Allen; J. Ilavsky; G.G. Long; J.S. Wallace; C.C. Berndt; H. Herman 📂 Article 📅 2001 🏛 Elsevier Science 🌐 English ⚖ 360 KB

Correlation of Microstructures and Tribo

Correlation of Microstructures and Tribological Properties of Ferrous Coatings Deposited by Atmospheric Plasma Spraying on Al-Si Cast Alloy Substrate

✍ Aleksandar Vencl; Mihailo Mrdak; Miloš Banjac 📂 Article 📅 2008 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 954 KB