✦ LIBER ✦

Microstructure and Mechanical Properties of TiB2/TiAl Composites Produced by Reactive Sintering Using a Powder Extrusion Technique

✍ Scribed by T. W. Lee; C. H. Lee

Book ID: 110239087
Publisher: Springer
Year: 1999
Tongue: English
Weight: 119 KB
Volume: 18
Category: Article
ISSN: 0261-8028
DOI: 10.1023/a:1006645302032

No coin nor oath required. For personal study only.

📜 SIMILAR VOLUMES

Microstructure and properties of a TiAl

Microstructure and properties of a TiAl alloy prepared by mechanical milling and subsequent reactive sintering

✍ Fang Wenbin; Hu Lianxi; He Wenxiong; Wang Erde; Li Xiaoqing 📂 Article 📅 2005 🏛 Elsevier Science 🌐 English ⚖ 258 KB

A TiAl-based alloy with nominal composition of Ti-36 wt.% Al was prepared by a mechanical milling and reactive sintering route consisting of three basic steps: (1) mechanical milling of blended elemental Ti and Al powder mixture, (2) densification and consolidation of as-milled Ti/Al composite powde

Microstructure and mechanical properties

Microstructure and mechanical properties of ZrB2–MoSi2 ceramic composites produced by different sintering techniques

✍ Diletta Sciti; Frédéric Monteverde; Stefano Guicciardi; Giuseppe Pezzotti; Alida 📂 Article 📅 2006 🏛 Elsevier Science 🌐 English ⚖ 344 KB

Ceramic composites in the system ZrB2–(15–20vol% MoSi2) were produced by different densification techniques: pressureless sintering, hot-pressing and spark plasma sintering. Regardless of the sintering technique, the addition of 15–20vol% MoSi2 was beneficial for the densification of these composite

Influence of the Processing Route in the

Influence of the Processing Route in the Microstructure and Mechanical Properties of NiAl/TiB2Composites Produced by Combustion Synthesis

✍ Ricardo D. Torres; Carlos M. Lepienski; John J. Moore; Ivar E. Reimanis 📂 Article 📅 2009 🏛 The Minerals, Metals & Materials Society 🌐 English ⚖ 666 KB

Effect of Nb2O5 on the microstructure an

Effect of Nb2O5 on the microstructure and mechanical properties of TiAl based composites produced by hot pressing

✍ Jianfeng Zhu; Wenwen Yang; Haibo Yang; Fen Wang 📂 Article 📅 2011 🏛 Elsevier Science 🌐 English ⚖ 843 KB

Effect of sintering process on the micro

Effect of sintering process on the microstructures and properties of in situ TiB2–TiC reinforced steel matrix composites produced by spark plasma sintering

✍ Binghong Li; Ying Liu; Jun Li; Hui Cao; Lin He 📂 Article 📅 2010 🏛 Elsevier Science 🌐 English ⚖ 830 KB

Spark plasma sintering (SPS) is a new technique to rapidly produce metal matrix composites (MMCs), but there is little work on the production of TiB 2 -TiC reinforced steel matrix composites by SPS. In this work, in situ TiB 2 -TiC particulates reinforced steel matrix composites have been successful

Microstructure and property characterisa

Microstructure and property characterisation of 3-3 Al(Mg)/Al2O3interpenetrating composites produced by a pressureless infiltration technique

✍ Hong Chang; Rebecca Higginson; Jon Binner 📂 Article 📅 2010 🏛 Springer 🌐 English ⚖ 677 KB